PDA

View Full Version : Stringing for O3 blue


pickles1107
10-10-2006, 05:52 AM
Hi folks,
Can anyone point me in the direction of a stringing pattern for o3 blue? I am stringing one for a friend but can't find instructions anywhere as far as mains to skip, tie offs, etc. Strangely enough, its not on Prince's website...(?)

If not I'll just call prince.

Thanks for any help.

MasterTS
10-10-2006, 05:54 AM
Hi folks,
Can anyone point me in the direction of a stringing pattern for o3 blue? I am stringing one for a friend but can't find instructions anywhere as far as mains to skip, tie offs, etc. Strangely enough, its not on Prince's website...(?)

If not I'll just call prince.

Thanks for any help.

I've always found it strange I've never once looked at stringing instructions.. I've strung wilsons, heads, prince and various models.. isn't it just second nature after looking at the racquet?

Clintspin
10-10-2006, 06:07 AM
http://www.klipperusa.com/stringing/viewpattern.php?mfg=TPRI

pickles1107
10-10-2006, 06:21 AM
I've always found it strange I've never once looked at stringing instructions.. I've strung wilsons, heads, prince and various models.. isn't it just second nature after looking at the racquet?

Not really second nature with the weird O-port things. Also, I believe that wehn doing one piece stringing, the short side has to go to a particular side on this racquet.



Thanks Clintspin.

dainova
10-10-2006, 06:29 AM
O3 BLUE 55 - 65 LB?

Hi, pickles

Also preparing for my first O3, found range bit higher for this type of head.
How much LB you putting on it ? Or it expected be higher b/z of O ports.

Tx
Dai

21'M - 19'C 16M X 19C 7,9T - 7,9B 8T 7T 10T - 9B

pickles1107
10-10-2006, 06:53 AM
O3 BLUE 55 - 65 LB?

Hi, pickles

Also preparing for my first O3, found range bit higher for this type of head.
How much LB you putting on it ? Or it expected be higher b/z of O ports.

Tx
Dai

21'M - 19'C 16M X 19C 7,9T - 7,9B 8T 7T 10T - 9B

My friend wanted it strung at 60 which is right in the middle.
Also, this shows only 2 piece stringing...Is there a one piece pattern with short side length?

Sebastien
10-10-2006, 07:55 AM
I've always found it strange I've never once looked at stringing instructions.. I've strung wilsons, heads, prince and various models.. isn't it just second nature after looking at the racquet?

Fully agree with you.
Having an O3 Myself, I wonder why someone would ask a question like that, the skips are marked by a dot and as for the knot it is soooo obvious the hole is like 10x bigger.