View Full Version : Questions on 6-PT SC Suspension Mounting System
11-24-2006, 04:06 PM
I'm trying to see if the mounting system might be usable for my old
(non-Gamma) electronic machine.
What is the dimension of the mounting system ? (length, width, height)
How does it gets fixed on the base ?
11-27-2006, 09:54 AM
I should have put "Gamma" somewhere in the title...
11-29-2006, 10:54 AM
For SC turntable (both 2 & 6 Pt mounting):
(all dimensions are actually in metric but this will be a quick check)
length of the turntable from knob to knob is ~23"
width (including the handles) is ~13"
height is ~1.5"
4 bolt pattern is ~1-3/8" x ~1-3/8" in the center of the TT
the bottom of the TT is flatFor 6 pt mounting:
the height from the top of the TT to the bottom surface where the rqt sits on the shoulder support is 6-7/8". The height to the top of the shoulder support is 8-3/8". remember to add in the height of the turntable for the overall height.
For 2 pt mounting:
the height from the top of the TT to the bottom surface of the rqt. mounting is 7". add ~1" for hold down and the thickness of the rqt for the overall height of the mounting arm. remember to add in the height of the turntable for the overall height.
vBulletin® v3.8.8, Copyright ©2000-2015, vBulletin Solutions, Inc.