PDA

View Full Version : Head XRC String Pattern


jorel
09-28-2007, 06:39 PM
This is annnoying,,, I just bought three XRCs and they were all strung with three different stringing patterns.

Does anyone know the correct string pattern for this racquet?

gjoc
09-28-2007, 07:42 PM
One-piece stringing is not allowed.

Here is the pattern for two-piece stringing:

Head XRC.

Instructions:

String Tension: 52-62 lbs.

String Length: 15' x 16'.

String Pattern: 16 x 20.

Start Mains at Throat--Mains skip 8T and 8H--Tie off Mains at 6T.

Start Crosses at Top at 7H--Bottom Cross at 7T--Tie off Crosses at 6H and 8T.

Shared Holes: 7T, 9T & 7H, 9H.

A.T.S.
09-28-2007, 08:58 PM
Sorry if this sounds stupid but what is a Head XRC? I looked it up and all I can find are skiis.

vsbabolat
09-29-2007, 06:18 AM
Sorry if this sounds stupid but what is a Head XRC? I looked it up and all I can find are skiis.

The HEAD XRC is a early composite racquet from the late 70's to about 1982. It was replaced in 1982 by the Graphite Vector.

jorel
10-01-2007, 03:56 AM
One-piece stringing is not allowed.

Here is the pattern for two-piece stringing:

Head XRC.

Instructions:

String Tension: 52-62 lbs.

String Length: 15' x 16'.

String Pattern: 16 x 20.

Start Mains at Throat--Mains skip 8T and 8H--Tie off Mains at 6T.

Start Crosses at Top at 7H--Bottom Cross at 7T--Tie off Crosses at 6H and 8T.

Shared Holes: 7T, 9T & 7H, 9H.

interesting..... none of them were strung with that pattern