PDA

View Full Version : make pd+ into pure drive roddick+


notujoo
03-24-2008, 10:42 PM
any one know where to put weights on a pure drive+ to make the specs exacty same as PDR+?

strike
03-25-2008, 07:04 AM
any one know where to put weights on a pure drive+ to make the specs exacty same as PDR+?

don't think it is possible...

I tried, and while I got it close, it still was not the same. Comparing the two, taped PD+ and PDR, the PDR is just more stable and solid. Less vibration, more stable, more control. OK, mine is the PDR, not the plus, but very comparable. I like the PDR better.

I put 10 grams in the head...approx 5 grams strips each side at 9:30 & 2:30 (cut in two, one each side of the strings) and approx 1.5-2 grams in the butt cap. This was the best placement I achieved, and I tried in multiple locations: primarily under the handle, 3&9, 10&2, etc... I found 9:30 & 2:30 to provide best combo of pulling up the sweet spot and provide stability.

I think I could have realistically added 2 more grams, so 6 grams each side, but much beyond that I think would be unwieldy.

Good luck!

notujoo
03-26-2008, 11:54 PM
thank you very much!