PDA

View Full Version : Cap grommets for Ti classic


igor
01-05-2005, 07:27 PM
I have heard from others here that they successfully installed CAP grommet from iPrestige MP on TiClassic. Do you think LM Prestige grommet would work just as well?

OnyxZ28
01-05-2005, 08:17 PM
Yup, they will.

hlkimfung
01-05-2005, 11:35 PM
becareful though, it would fit but not nesscarily practical

I don't know about the LM but I once try to install the I-prestige MP cap grommet onto a PT 280. It fit but the hole on the grommet is too short and it did not pop outof the drilled holes

I guess the I-prestige had thinner wall compared to the 280.

Don't know if it's pose a problem on the string though since the string might cut thru the racquet at the corner if the hole is not long enough

OnyxZ28
01-06-2005, 12:01 AM
My PT280 accommodates the i.Prestige CAPS just fine. Grommets come out of the holes, when the stringing pulls the whole CAP down towards the grommet strip groove.

David Pavlich
01-06-2005, 05:57 AM
Why do you want to put a cap grommet on your frame? If you don't string your own, your favorite stringer will divorce you. :-)

David

!<-_->!
01-06-2005, 02:34 PM
OnyxZ28, have y ou tried the LM CAPS on a PT 280. I plan on doing this the next time I restring.

OnyxZ28
01-06-2005, 02:41 PM
Haven't tried it. They LM CAPs look like they add a bit more weight to the head compared to the i.Prestige CAPs. However, the i.Prestige CAPS didn't add as much as I thought. Next time I will try normal CAPS.