PDA

View Full Version : Eagnas Starting Clamp


kenshireen
04-08-2008, 07:52 PM
I have a Eagnas starting clamp and use it primarily to pull knots.. When I grab the string at the bottom of the clamp and pull it slides out under pressure... Am I grabbing with the wrong part (i.e. should I use the tip) or is this a crappy clamp

Ken

YULitle
04-09-2008, 01:18 AM
when I use a starting clamp in this way, I put the top of the clamp in my hand and pass the string through my two center fingers (ring and middle.) If you try to pull the knot tight while holding the bottom of the clamp it will open the jaws and the string will slip through.

iplaybetter
04-09-2008, 05:34 AM
you can see it used as YULlitle descibes when i tie off in my vids

1012007
04-09-2008, 01:54 PM
you can see it used as YULlitle descibes when i tie off in my vids

Or is YULitle's...