PDA

View Full Version : papery stuff peeling of grip pallet...


jjordache
05-08-2008, 09:02 PM
http://img259.imageshack.us/img259/9759/img1594rq2.th.jpg (http://img259.imageshack.us/my.php?image=img1594rq2.jpg)

^^^^
what do you guys think ? should I prep the pallet in any way before wrapping the new grip ? That stuff (looks like paint layer, but with a paper feel) came off when I unwrapped the old grip.

LanEvo
05-08-2008, 09:06 PM
my lm prestige also has that same stuff, but only a little bit of mine has come off

jjordache
05-09-2008, 09:51 AM
my lm prestige also has that same stuff, but only a little bit of mine has come off

yeah, I didn't know about it otherwise I would have been more careful when removing the old grip. The microgels have this sticky tape tightly wrapped around a black pallet that looks like plastic (?).

Abriano
05-09-2008, 10:06 AM
it is the same material as the rest of the brittle Head pallets, just a harder surface layer
you can protect the PU with some low adhesive masking tape

jjordache
05-09-2008, 10:54 AM
it is the same material as the rest of the brittle Head pallets, just a harder surface layer
you can protect the PU with some low adhesive masking tape

PU ?
by low adhesive masking tape you mean like the painter's blue tape or more something like electrical tape ?

Abriano
05-09-2008, 12:16 PM
the pallets are made of polyurethane (PU) foam
yes, something like the painterīs blue tape but not electrical tape, it will stick too well

jjordache
05-09-2008, 12:24 PM
the pallets are made of polyurethane (PU) foam
yes, something like the painterīs blue tape but not electrical tape, it will stick too well

aha, ok thanks!