PDA

View Full Version : Stringing instructions for the rossignol F200


joe sch
09-14-2008, 06:14 AM
Anbody have the Stringing instructions for the rossignol F200 ?

jim e
09-14-2008, 09:24 AM
Anbody have the Stringing instructions for the rossignol F200 ?

Here you go, hope this helps. Jim E
The instructions listed for this one was only listed for a 1 piece as listed below.
When I see patterns like this I usually give myself a little extra string lenght on each side, as sometimes the lenghts listed are cutting things close, until I have done the racquet once , then I make note of lenght. But this is what is listed.

Lenght 1 pc. 33' 6"
Short side 9'
tension: 45-57
Pattern :16X17
Start M's: H
Main skips :8T & 8H
Tie off m's : 7H
Start 1 pcX: 8H
Last 1 pc X :8T
Tie 1 Pc X:7T
Shared Holes 9T&9H