PDA

View Full Version : Thin Poly strings


lilxjohnyy
10-25-2009, 12:54 PM
Im always looking for thin poly strings to try on my MG prestige mid.
List all the thin poly you can think of (1.20 and below)
MSV Hex
BA Micro
Blue Gear 1.19
Polyfibre TCS 1.20
X Force 18
TiMO 1.10
Luxilon Ace 1.12
Kirschbaum PL 1.15
Volkl Cyclone
Isospeed Baseline Spin

Murray_fan1
10-25-2009, 12:56 PM
Weiss Cannon Turbo Twist 1.18

Danstevens
10-25-2009, 01:08 PM
Babolat Pro Hurricane 18.

-Kap-
10-25-2009, 01:34 PM
Topspin Cyber Flash and Cyber Blue 17L

hoodjem
10-25-2009, 02:16 PM
Best I tried was Kirschbaum Pro Line I 1.15 and Lux BBA 1.12

Of course CF 1.20 and MSV Hex 1.10 were also very, very good.

MarrratSafin
10-25-2009, 03:09 PM
Luxilon Ace, Turbotwist and MSV Hex are some of the thin polys I really enjoyed. Another worth a mention is Signum Hyperion 1.18. PLII must be even better in 1.15 as I thought the 1.20 is good stuff already!

Superman1272
10-26-2009, 02:58 PM
Gamma ZO True 18
Signum Pro Poly Plasma 1.18

jazar
10-27-2009, 01:48 AM
pacific poly power is available in 1.20 and 1.10 and there is a 1.17 TiMo now as well

dadozen
10-27-2009, 06:05 AM
Best I tried was Kirschbaum Pro Line I 1.15 and Lux BBA 1.12

Of course CF 1.20 and MSV Hex 1.10 were also very, very good.

Hood, I thought you liked PLII better than PLI. At least it's what In understood. What's the difference about those two? from what I can see in the RSA string table, PL I is a tad crisper and holds tension better. But are there another differences?

steve728
10-28-2009, 09:59 AM
Are you guys using full poly or hybrids with these thin polys? I always can't decide what to put in the crosses. I can choose from Maxim Touch, Spiral Flex, Gosen OG Micro, and Forten Sweet --- too many variable, especially if you consider tensions too.

Dgpsx7
10-28-2009, 10:13 AM
MSV Hex 1.10 are my fav

downs_chris
10-28-2009, 10:20 AM
MSV Hex 1.10 are my fav

i second that...do you do an all poly or hybrid string job?

dadozen
10-28-2009, 10:53 AM
I didn't like MSV Hex, and I've tried it on 1.18mm and 1.10mm.

Using a full poly stringjob with these thin polys is just great, especially if you like low tensions.