PDA

View Full Version : prince vortex with ats ss 2 machine


soulincontrol
04-11-2004, 05:11 PM
Im having a hard time stringing my prince vortex mp. The problem is that it has staggered string pattern and im having trouble holding tension with the flying clamps on the ats ss 2 stinger. Are there any tricks or special tools to make this work better? Any info will help.

Gaines Hillix
04-12-2004, 04:49 PM
soulincontrol, just angle the clamps to match the plane of the strings.

rich s
04-12-2004, 05:33 PM
Gaines -

there is no real common plane. The vortex is one of the frames with the offset grommets so you get a twisted action between the strings.

rich

Koz
04-17-2004, 07:16 AM
Yeah, the strings make a 30(ish) degree angle. Like this...

()>-----<() that's a racquet cross section..

I guess you're just gonna have to clamp closer to the middle, but get as close to the frame as you can, w/out slipping.