View Full Version : Dunlop 4d 200 Tour Stringing Instructions
03-26-2010, 10:03 AM
Don't really know if this is the right place to be asking this but I've been looking everywhere for 200 tour stringing instructions and I just can't find 'em. Specifically, I want to know if I can do this as a 2 piece job instead of a 1 piece job. And I don't know where to tie off the mains and crosses (Dunlop Customer Service wasn't much help either). My coach and I string my racquets and he insists on getting the correct stringing instructions so to keep the frame's integrity/stability and what not. Any help would be greatly appreaciated. Thanks.
03-26-2010, 11:07 AM
Use the dropdown. Good luck.
03-26-2010, 11:32 AM
It's not there. There's just the regular 200, not the 200 tour.
03-26-2010, 11:44 AM
Stringing can be done 1 or 2 piece.
1 Piece = 37' string with 10' short side
2 Piece = 20' x 17' of string.
Tension = 55-65lbs (24.9-29.5kg)
Pattern = 16x18
Start mains at head (H)
Mains skip 8 throat (T) & 7H,9H
Tie off mains at 6H
1 Piece X start at 7H end at 8T; tie off at 7T
2 Piece X tie off at 5H, 7T
Hope this helps
Cheers, TennezSport :cool:
03-27-2010, 06:25 AM
Thanks a ton!
vBulletin® v3.6.9, Copyright ©2000-2014, Jelsoft Enterprises Ltd.