PDA

View Full Version : Does all wilson rackets must have a serial number ?


Jovi.M
02-08-2012, 12:16 AM
Hello everyone,

I have 2 wilsons six.one 95 BLX 18x20, even I bought them at the same time, they have couple things totaly different.
First of all, one of them does'nt have a serial number (1204-11) and other specs are at different space as at the one what does.
Second, one what does'nt have a serial number has a shiny finnish, and the other which has a serial number has a dead, flat finnish.

So, what finnish has your six.one 95 BLX and does all of yours have a serial number?

Jovi.M
02-11-2012, 06:22 AM
this is what I tought . . .

see picture here:
http://www.facebook.com/media/set/?set=a.2268431915658.2111083.1394388397&type=1#!/photo.php?fbid=2718628570293&set=a.2268431915658.2111083.1394388397&type=3&theater

Jovi.M
02-11-2012, 06:25 AM
https://picasaweb.google.com/105773551680568198372/Wilson6195BLXAfter8HoursOfPlay#5707883864178732194

UCSF2012
02-11-2012, 09:31 AM
what are we looking at? My screen says page not found

Jovi.M
02-12-2012, 04:32 AM
should be all ok now . . .
https://picasaweb.google.com/105773551680568198372/Wilson6195BLXAfter8HoursOfPlay#5707883864178732194

Torres
02-12-2012, 05:57 AM
There are both gloss and matt finishes.

If you bought it from a reputable retailer, there really is nothing to worry about.

Jovi.M
02-16-2012, 04:37 AM
There are both gloss and matt finishes.

If you bought it from a reputable retailer, there really is nothing to worry about.

Thank you,
and what about a "mixed up" specs and missing "serial number (2256-10)" on glossy racket? Is it also ok?

PrinceMoron
02-16-2012, 05:41 AM
What is imprinted into the polyurethane handle UNDER the grip? Should be a few numbers and figures equating to grip size and date of manufacture.

quest01
02-16-2012, 07:19 AM
They may have been made in different factories. That happened to two Wilson racquets I bought in the past and they both felt a little different too.

Jovi.M
03-05-2012, 03:16 AM
What is imprinted into the polyurethane handle UNDER the grip? Should be a few numbers and figures equating to grip size and date of manufacture.

I found a number 3 on the one side (grip size it should be) and on the other, there is GR62.