PDA

View Full Version : Internal dimensions of Head and Volkl palettes


6-2/6-4/6-0
02-23-2012, 07:28 AM
I have a thread in the classic racket forum asking about replacing the grip on my Rossi F200 (I got one on the auction site where I mis-read the grip and instead of it being 3/8ths, it was 5/8ths). I popped the but cap off and measured the dimensions of the hairpin underneath and wanted to know what the dimensions on the inside of the Head or Volkl palettes is so that I can possibly clean off the foam and put on one of those palettes in its place.

Does anyone here have that info at hand, or can you measure from a racket or palette?

Thanks a million...

TaihtDuhShaat
02-23-2012, 07:36 AM
Just measured a head hairpin- 17mm x 25mm

6-2/6-4/6-0
02-23-2012, 08:05 AM
I also just saw that RPNY offers palettes, does anyone know the dimensions of those?

Gee
02-23-2012, 08:38 AM
Volkl pallets dimensions (inside) are 20-21 mm deep and 25 mm wide.

scotus
02-23-2012, 08:41 AM
I also just saw that RPNY offers palettes, does anyone know the dimensions of those?

When you see the price, you won't want to know the dimensions.

6-2/6-4/6-0
02-23-2012, 09:04 AM
Why, how much do the Head/Volkl palettes/but caps cost?

scotus
02-23-2012, 09:29 AM
Why, how much do the Head/Volkl palettes/but caps cost?

They are half the price here in the States (Volkl, that is. Can't find Head for sale). RPNY: $30. VOLKL: $15.

But if you order from TWE in bulk, they can be had for cheaper.