PDA

View Full Version : Stringing Instructions -- 2012 Wilson Pro Staff 6.1 95 BLX


myservenow
03-03-2012, 08:05 AM
Anyone have stringing instructions for the 16 x 19 version?

myservenow
03-03-2012, 09:37 AM
Never mind. I just found it on Wilson's website. It wasn't in the stringing instructions page as far as I could tell, but the instructions were included once you look at the racquet specs themselves.

fms
03-24-2013, 11:05 AM
These are the instructions found at Wilson.com (and on the official PDF). I assume they're correct?

Pro Staff Ninety Five BLX
String Tension : 50-60 lbs
String Length : 38 (ss: 10) or (20 Ms and 18 Xs)
String Pattern : 16 x 19
Start Main : at Throat. Mains skip 7H, 9H, 7T and 9T. Tie off Ms at 8T.
One Piece : Start Xs at bottom at 7T. Tie off Xs at 5H.
Two Piece : Start Xs at top at 7H. Tie off Xs at 5H & 11T.

zapvor
03-24-2013, 03:39 PM
yea that looks right

fms
03-24-2013, 11:38 PM
Thanks, I was just asking because it's exactly the same as the 6.1 Tour - except that one says Tie off M's at 6T.

(And yes I don't know anything about stringing :))

Irvin
03-25-2013, 02:22 AM
Thanks, I was just asking because it's exactly the same as the 6.1 Tour - except that one says Tie off M's at 6T.

(And yes I don't know anything about stringing :))

Most wilson rackets are 16 main rackets and skip 7 & 9 top and bottom. The mains start and end at throat and the 6th mains come out of 6T and cover 7T on both sides. The 8th mains come out of 10T and if they tie at 6T they will also cover 7T on both sides. makes for an interesting set if stringing two piece when string two piece when you get to the end. Two holes blocking 7T is a problem if you are not careful and prepare.

fms
03-27-2013, 03:11 AM
Thanks for the replies!