View Full Version : Stringing cyber flash

06-30-2006, 11:55 AM
Do I do the same stringing procedures on cyber flash cause on poly polar, you have to do some extra pulling.

06-30-2006, 12:01 PM
I have not needed to do any extra pulling on cyberflash, but if you are on a lock out machine, you might want to take your time when cranking the tension head. If you are on a constant pull, your usual procedure should work fine. I also don't recommend dropping tension on this poly. It is soft enough already in my experience.

jack mckinney
06-30-2006, 05:29 PM
i agree with kevo. i didn't drop the tension when stringing this. it does play very soft. no extra pulling on my part.

06-30-2006, 05:34 PM
String it as normal. Nothing tricky or special about installing this string.