PDA

View Full Version : Portable/Folding Cart, Dolly, or Hand Truck for Ball Machine/Tennis Equipment


varuscelli
08-15-2006, 07:27 AM
I've been reading through current and past threads on ball machines and occasionally see references to the difficulties in getting the machine and other tennis gear from vehicle to courts and back again.

In looking over the way most ball machines are built, even the ones that do have wheels don't seem to be built for much more than rolling around the tennis court area itself. What I suspect is that if your using the average wheeled ball machine in such a way that you have to carry it in a car, roll it over various types of terrain to get it to the courts (parking lots of varying quality, sidewalks, over bumps, curbs, steps, perhaps even across grass), you're likely subjecting the machine and its wheels to more than it was designed to accommodate. (Much less the overall bumps and vibrations to which you're subjecting the machine's internal parts and electronics, which could end up causing problems down the road.)

So, I've been doing a bit of research into portable (foldable) carts, dollies, and hand trucks that might be suitable to use when transporting ball machines and other gear to and from a vehicle when taking the machine out to practice. And, it's not only getting the machine back and forth, but all the other things that might be part of a session on the courts.

This list could include:

Ball machine
Ball hopper
Balls (if you can't fit all into the machine or hopper for transport)
Tennis bag or racquets
Water jug or small cooler

Granted, you won't need to take all of this stuff out every time, but who knows? You might want to. And the greater the distance you've got to go from vehicle to courts, the greater your need might be for something like a cart to ease the pain of moving everything back and forth.

Criteria for the cart/dolly/truck would be stability and portability (and by portability, will it fold up and fit easily into a vehicle that's also carrying a ball machine?).

Here are some links to products that I think could be considered. I'm also looking for other suggestions (or feedback on these).

http://www.handtrucksrus.com/folding/large/f3_lg.jpg

http://www.handtrucksrus.com/newluggage.aspx

http://tmt.stores.yahoo.net/milmod20four.html

http://www.handtrucksrus.com/rock/r2large.bmp

http://www.handtrucksrus.com/trucks/vc/lg/nicetrylg.jpg

http://www.industromart.com/folding.htm

http://www.handtrucksrus.com/folding.aspx

http://www.handtrucksrus.com/newluggage.aspx

e.martin
08-15-2006, 10:11 AM
This one (http://www.rubbermaidcommercialproducts.com/products/8993/4401-86-Caterer-s-Triple-Trolley-20422.html) worked really well for me. Easily fits an I-SAM Portable ball machine and a 75-ball ball hopper, side by side. Then you can put a large tennis bag on top. Great for other uses as well, like moving.

Also check out this Froogle search (http://froogle.google.com/froogle?q=rubbermaid+4401&btnG=Search+Froogle) on the 4401.

varuscelli
08-15-2006, 10:39 AM
This one (http://www.rubbermaidcommercialproducts.com/products/8993/4401-86-Caterer-s-Triple-Trolley-20422.html) worked really well for me. Easily fits an I-SAM Portable ball machine and a 75-ball ball hopper, side by side. Then you can put a large tennis bag on top. Great for other uses as well, like moving.

Also check out this Froogle search (http://froogle.google.com/froogle?q=rubbermaid+4401&btnG=Search+Froogle) on the 4401.

Nice suggestion, and thanks for the link.

Does the Rubbermaid 4401 have hard rubber wheels or more of a hollow, hard plastic wheel? (It's a bit difficult to tell from the images.)

Cruzer
08-15-2006, 11:48 AM
I have a folding handtruck along the lines shown in at this site, http://www.handtrucksrus.com/folding.aspx. It works well for carrying my TT 4+ and a large bag of tennis balls and it folds to a fairly small size. I don't have to deal with any curbs or steps transporting my stuff from my car to the courts at my tennis club but I wanted to get something with fairly large wheels since they would be able to accomodate curbs or steps easier than a cart with small wheels.

varuscelli
08-15-2006, 12:19 PM
I don't have to deal with any curbs or steps transporting my stuff from my car to the courts at my tennis club but I wanted to get something with fairly large wheels since they would be able to accomodate curbs or steps easier than a cart with small wheels.

Good point about dealing with curbs or steps. That's one of my concerns, too, and has me leaning toward dolly-style carrier rather than a strict 4-wheeler (unless the 4-wheeler has big enough wheels to accommodate a curb or steps -- but then it's less likely to be truly portable or foldable for easy transport in a vehicle).

I have a couple of courts where I play and practice that are essentially handicap accessible (ramps for access), and those would easily be accessed with a cart with smaller wheels.

On the other hand, I play at a couple of other places where in the very least I have to go over a curb (or go way around) and I'd like going over curbs to be as smooth and easy as possible.

Another consideration is wheel size and construction. Generally, the larger the wheel, the smoother the ride. Lots of the dollies have larger wheels for smoother rides. Carts with larger wheels tend to be on the bulky side and may not be as portable as would be desired.

e.martin
08-16-2006, 06:09 AM
Nice suggestion, and thanks for the link.

Does the Rubbermaid 4401 have hard rubber wheels or more of a hollow, hard plastic wheel? (It's a bit difficult to tell from the images.)
I think it's hard rubber or maybe a composite. It makes a little noise when you pull the cart over a pebbled surface, but very quiet over smooth surfaces like the tennis court. The platform itself is thick industrial plastic.

I have the version with larger wheels and a straight handlebar. One of the images in the search results show small wheels, and the first several images show an angled handlebar, which is confusing to me. Maybe there are different versions of the 4401.

varuscelli
08-16-2006, 06:20 AM
I think it's hard rubber or maybe a composite. It makes a little noise when you pull the cart over a pebbled surface, but very quiet over smooth surfaces like the tennis court. The platform itself is thick industrial plastic.

I have the version with larger wheels and a straight handlebar. One of the images in the search results show small wheels, and the first several images show an angled handlebar, which is confusing to me. Maybe there are different versions of the 4401.

Yeah, I figured you were using the version with the larger wheels. The one with the smaller wheels has MUCH smaller wheels, so I didn't think that was the one you meant. But on the wheel material, it was difficult to tell from either the description or the photos. And I do like the idea of the industrial plastic platform (weight reduction, etc.).