PDA

View Full Version : Making Grip Smaller


Lleyton Hewitt
09-04-2006, 09:14 AM
How do i make a grip smaller? eg.....is it possible to use 2/3 overgrips intead of 1 replacement grip and an overgrip?

I no about the heat shrink one

Sixpointone
09-04-2006, 09:49 AM
Hi Lleyton,

My best suggestion is to remove the Replacement Grip, try the 2-3 Overgrips as you are thinknig about, and see if it works for you.

Worst case scenario, if it does not work, is you can reinstall the Replacement Grip.

BTW, using Overgrips as your base grip might cause a slight bit more vibration to be felt, which may or may not be an issue for you.

Hope that helps,
John

need2paint
09-04-2006, 02:12 PM
I would try a thinner replacement grip and not use an overgrip. Try the Wilson Micro-Dry Feel.