Alu Power and NXT 16

Discussion in 'Strings' started by chaddles, Aug 16, 2009.

  1. chaddles

    chaddles Semi-Pro

    Joined:
    Aug 5, 2009
    Messages:
    524
    Location:
    Down Under
    I'm still in the learning stage of the restringing game and am experimenting with different setups. I am currently using a Speedport Black with the Hole inserts in for the new combo. My previous setup was Alu Rough on the mains and NXT 16 on the crosses both @ 58lb - I have been getting a very sore arm when I have a long hitting session and I didn't want to change from the Big Banger Alu range cause I love the way the strings plays.

    This is the setup that I put in on the weekend:
    NXT 16 on mains @ 56lb
    BB Alu Power on crosses @ 54lb

    My thinking was that I drop the tension for a bit more power and hopefully make it a bit easier on my arm. I also read that you should string the Alu power at less tension than your synthetic guts and the like.

    Have I lost the plot with trying this setup?? I haven't had a chance to try it out with the weather and just wanted to see what you guys think of it.

    Cheers
     
    #1
  2. chaddles

    chaddles Semi-Pro

    Joined:
    Aug 5, 2009
    Messages:
    524
    Location:
    Down Under
    Finally got on the court last night for brief hit and was initially very impressed - found it a lot easy to hit deep heavy balls with good accuracy (for me) - very positive feedback from my hitting partner telling me that I was hitting with way more top spin than normal.... Backhand was even getting a bit more consistancy and a lot more power and top spin.

    Only drama's was when I shanked a few they flew of the racquet very deep, and am not expecting much durability with this as there was an extreme amount of movement on the NXT mains across the Alu Power which will probably saw through them in no time.

    Think I still need to tweak it a little to get it right but not sure what to do next - maybe increase tension of the NXT??
     
    #2
  3. highgeer

    highgeer Rookie

    Joined:
    Mar 13, 2009
    Messages:
    155
    Try Polyfibre TCS in the crosses; it seems to be slicker than ALU power.
    I break alot of strings, but I usually get 3-4 hour out of this setup, and my strings are almost dead by then anyway.

    Mike
     
    #3

Share This Page