Assembly needed for Gamma X-2

Discussion in 'Stringing Techniques / Stringing Machines' started by NadalFan1990, Aug 19, 2008.

  1. NadalFan1990

    NadalFan1990 Guest

    the title is self-explanatory, but here's the gist: I am wondering how much of the machine is already put together and how much I have to put together...
     
    #1
  2. almerickso

    almerickso Rookie

    Joined:
    Aug 7, 2007
    Messages:
    368
    Location:
    Singapore/Philippines
    hmm... off the top of my head...

    the machine comes in a few pieces.

    Base

    turntable

    2 posts

    ratchet system with pillar

    weight

    4x spacers

    2x stoppers

    2x nut/knob

    ----

    you screw the ratchet system on the base using an allen key provided.

    then u remove the rubber stopper from the arm and slide in the weight with the knob nearer the ratchet system.

    slide the turntable into the base

    slide the posts with the arms outwards into the turn table and tighten with the allen key provided

    choose a height of spacer that fits your racquet and drop them on the screw on the posts.

    drop the stoppers on the screw

    then turn the nut down.

    that's about it i guess....
     
    #2
  3. TheShaun

    TheShaun Hall of Fame

    Joined:
    Jun 9, 2007
    Messages:
    2,108
    Location:
    [K]ANADA
    it will take you 5 minutes to put it together. it's almost all in pieces. it comes in a long narrow box. don't worry about it.
     
    #3
  4. Gamma Tech

    Gamma Tech Professional

    Joined:
    Oct 12, 2004
    Messages:
    808
    Location:
    Pittsburgh, PA
    #4

Share This Page