Bad String Job !!

Discussion in 'Strings' started by Tombhoneb, Oct 10, 2008.

  1. Tombhoneb

    Tombhoneb Rookie

    Joined:
    Jul 30, 2008
    Messages:
    174
    Location:
    UK
    I checked the knot locations on my friends racket before i cut them out and then i noticed this .....

    [​IMG]

    [​IMG]

    Is there any reason a stringer would do this ?
     
    #1
  2. stringwalla

    stringwalla Rookie

    Joined:
    Feb 26, 2008
    Messages:
    198
    It's a "starting knot". Hard to tell the location on the frame from your picture.

    The location of this and the other knots would tell the whole story-
     
    #2
  3. Irvin

    Irvin G.O.A.T.

    Joined:
    Mar 15, 2007
    Messages:
    11,815
    Location:
    Marietta, Ga
    I am not sure where the knots are but judging from the fact they are two different knots only one could be a starting knot. Looks like one is a bulkier knot so it could have been a starting knot. But neither is knotted around a string.

    Reason for doing this? Not sure, but it looks someone trying something new or someone new trying something. In the top picture it looks like there is also a bad nick in a string.

    Irvin
     
    Last edited: Oct 10, 2008
    #3
  4. Tombhoneb

    Tombhoneb Rookie

    Joined:
    Jul 30, 2008
    Messages:
    174
    Location:
    UK
    ok, sorry ... i am new to stringing and i only got taught that a knot is tied round a string. It looked a bit dodgy to me as 2 of the knots are round a string and 2 of them are not, with one knot embedded in the grommet. I thought there must be some reason for doing this ... i will upload a pic of the whole frame with knot locations when my phone (cam) is done charging.

    Cheers

    Here we go ...

    [​IMG]
     
    Last edited: Oct 10, 2008
    #4
  5. princemidplus

    princemidplus Rookie

    Joined:
    Aug 11, 2008
    Messages:
    273
    Location:
    UK
    those knots look highly suspicious to me. not a pro stringer but they do not look like they are tied around the cross or mains string. They look more like the knot was tied in the end of the string and then the tension in the string allowed to pull the knot to wedge itself in the grommet.

    As far as I am aware, you are supposed to tied the knot around the string as an anchor. A starting knot is large but it is still tied around a string.
     
    #5
  6. Irvin

    Irvin G.O.A.T.

    Joined:
    Mar 15, 2007
    Messages:
    11,815
    Location:
    Marietta, Ga
    Sounds like two piece string job where the cross strings were put in without tying them off around a main string. These were knots merely place in the crosses and tension was pulled. The knot eventually will pull through the grommet.

    I am not sure how you can get the right tension on the string tying a knot like that on the last cross string. Try to move the bottom cross string up and down to see if there is any tension on it.

    Irvin
     
    #6
  7. Irvin

    Irvin G.O.A.T.

    Joined:
    Mar 15, 2007
    Messages:
    11,815
    Location:
    Marietta, Ga
    Now it is getting more suspicious both of the questionable knots are at the bottom of the frame. This may be a spice. The strings also look well worn has the racket been played with much after stringing? Doesn't look good no matter what it is.

    Irvin
     
    #7
  8. GPB

    GPB Professional

    Joined:
    Mar 24, 2008
    Messages:
    1,187
    Location:
    Jacksonville, FL
    What kind of racket is that... a blueish-purpleish Wilson with PWS... I'm curious!
     
    #8
  9. diredesire

    diredesire Super Moderator

    Joined:
    Mar 16, 2004
    Messages:
    6,705
    There are approved knots that do not require tying around an anchor string. The "figure 8" knot, from what I understand is one of these. They shouldn't be used as tie offs, though, only for starting knots.
     
    #9
  10. Tombhoneb

    Tombhoneb Rookie

    Joined:
    Jul 30, 2008
    Messages:
    174
    Location:
    UK
    Sorry for the late reply...

    Its a Wilson Hammer 5.9 (tapered beam) . Its a fairly old racket. They brought a new paintjob of it out in red and thats as far as i know. Its my friends racket and she refuses to change it... even though the frame has been brutaly punished !! Im not going to string it again, i would bet £100 the frame would snap !!
     
    #10

Share This Page