Best teflon/lubricant spay?

Discussion in 'Stringing Techniques / Stringing Machines' started by jj300, Aug 13, 2005.

  1. jj300

    jj300 Semi-Pro

    Feb 21, 2004
    What do you guys think is the best teflon/lubricant spray for the guide rails on my revo 4k? Currently I just use some carquest teflon thing but I think the clamps might move better if I get a better spray. The stuff at gss, glide slide, is super expensive. Did anyone try TFL 50 Dry Lube? They state "TFL 50 Dry Lube has the highest concentration of Teflon™ available. It covers any surface and makes it as slippery as ice on ice. Unlike petroleum based lubes, it is clean, non-staining and anti-corrosive. Frankly it is unfair to call it just a lubricant." Any other ideas? Thanks guys
  2. Jerry Seinfeld

    Jerry Seinfeld Professional

    Feb 18, 2004
    There is some stuff called "Guide Slide" over at the Grand Slam Stringers site that works wonders. Cost is about $15.00. Worth a look. If you can;t figure out the URL by adding a .com to their name send me a message and I will send you the link.
  3. Gaines Hillix

    Gaines Hillix Hall of Fame

    Feb 11, 2004
    I use glide slide from GSS which is Teflon based. I've also used Slick 50 spray lube, which has Teflon in it and silcone spray lubes which seem to be less oily than other sprays. The one you mentioned sounds like it should work fine.
  4. Mike Cottrill

    Mike Cottrill Hall of Fame

    Sep 3, 2004
    Rem Oil at less than $2 at WM is an alternative. It is however it is a petroleum based product.

Share This Page