Broken Grommet/Bumper Guard

Discussion in 'Racquets' started by GOOOOOGA, Apr 27, 2005.

  1. GOOOOOGA

    GOOOOOGA Rookie

    Joined:
    Dec 30, 2004
    Messages:
    186
    I broke my bumper guard and a grommet on my Babolat PD+, and i bought the little replacement pack (with a replacement bumper and grommets). now the question is, where do i go to get my racquet fixed? i asked my coach if he could, but he said he doesn't really know how to do that. Is there any way i can do it myself without killing myself? if not, where shud i go (or who should i go to) to get the new grommets and bumper guard installed? can tenniswarehouse do it?
     
    #1
  2. Leon

    Leon Rookie

    Joined:
    Feb 15, 2005
    Messages:
    207
    Any good stringing shop. As long as a guy there knows what he is doing :D There are few that don't know
     
    #2
  3. Prince_of_Tennis

    Prince_of_Tennis Semi-Pro

    Joined:
    Feb 27, 2005
    Messages:
    799
    Location:
    Bay Area
    Just pop out the old ones and pop the news one in...Isn't that hard.
     
    #3
  4. GOOOOOGA

    GOOOOOGA Rookie

    Joined:
    Dec 30, 2004
    Messages:
    186
    Princeofsky, thats what im asking: how DO u pop them out and put the new ones in?
     
    #4
  5. SS

    SS New User

    Joined:
    Jul 13, 2004
    Messages:
    5
    1.Cut the strings out of the racquet.
    2.Using needle nose pliers (curved needle nose pliers work better) and pull the old grommets and bumper guards out.
    3.If you have an awl, use it to push out the grommets (inside of the racquet) where the strings are knotted (tied off)
    4.Inspect and clean the racquet so that there is no debris between the racquet and the new grommets.
    5.Insert the grommets first (on both sides start at 5 and 7 o'clock position of the racquet and work your way up) Using the awl will help line up the grommets into the hole
    6.once the grommets are in go ahead and put the bumper guard on. Before putting the bumper guard on use a hair dryer to "soften" the bumper guard as this will help give it more manueverability when putting it on the racquet. Do this for a couple of minutes. use the awl to line up the holes of the grommets and insert into racquet at the 12 o'clock position (make sure it lines up with each hole) and work your way down to the 3 and 9 o'clock position
    7. If the bumper kit does not stay, you can use a piece of packing string to tie down the bumper guard.


    I've had some experience in replacing bumper/grommet kits for customers/friends.

    Hope this helps.
     
    #5
  6. GOOOOOGA

    GOOOOOGA Rookie

    Joined:
    Dec 30, 2004
    Messages:
    186
    thanks ss. im gonna try it this weekend
     
    #6
  7. SS

    SS New User

    Joined:
    Jul 13, 2004
    Messages:
    5
    GOOOOGA - were you able to install the bumper/grommets in to your racquet?
    Just wanted to see how it went.

    SS
     
    #7
  8. TennisD

    TennisD Semi-Pro

    Joined:
    Feb 15, 2005
    Messages:
    655
    I usually just do my CAP grommets myself...once you figure it out, it's easy stuff.
     
    #8

Share This Page