Dunlop 4d 200 Tour Stringing Instructions

Discussion in 'Strings' started by ccmasterk, Mar 26, 2010.

  1. ccmasterk

    ccmasterk Guest

    Don't really know if this is the right place to be asking this but I've been looking everywhere for 200 tour stringing instructions and I just can't find 'em. Specifically, I want to know if I can do this as a 2 piece job instead of a 1 piece job. And I don't know where to tie off the mains and crosses (Dunlop Customer Service wasn't much help either). My coach and I string my racquets and he insists on getting the correct stringing instructions so to keep the frame's integrity/stability and what not. Any help would be greatly appreaciated. Thanks.
  2. mikeler

    mikeler Moderator

    Sep 26, 2008
    Central Florida
  3. ccmasterk

    ccmasterk Guest

    It's not there. There's just the regular 200, not the 200 tour.
  4. TennezSport

    TennezSport Hall of Fame

    Jan 18, 2006
    Northern NJ, USA
    Dunlop 4D 200T.............

    Stringing can be done 1 or 2 piece.

    1 Piece = 37' string with 10' short side
    2 Piece = 20' x 17' of string.
    Tension = 55-65lbs (24.9-29.5kg)
    Pattern = 16x18
    Start mains at head (H)
    Mains skip 8 throat (T) & 7H,9H
    Tie off mains at 6H
    1 Piece X start at 7H end at 8T; tie off at 7T
    2 Piece X tie off at 5H, 7T

    Hope this helps

    Cheers, TennezSport :cool:
  5. ccmasterk

    ccmasterk Guest

    Thanks a ton!

Share This Page