Eagnas Glide Bar Clamps

Discussion in 'Stringing Techniques / Stringing Machines' started by !<-_->!, Sep 25, 2010.

  1. !<-_->!

    !<-_->! Professional

    Joined:
    Feb 21, 2004
    Messages:
    1,148
    Anyone know if the ones available for sale on the eagnas site will fit an Ektelon Model H glidebar?

    Also, are the clamps any good? My current OEM clamps are rather old and beat up. These seem to be a cheap solution if they work and are decent.
     
    #1
  2. liehssahmster

    liehssahmster New User

    Joined:
    Jun 16, 2006
    Messages:
    71
    I can't confirm the current ones will work, but I have Eagnas glide bars from 10-12 years ago on my Model H. And I have Gamma clamps.
     
    #2
  3. David 110

    David 110 New User

    Joined:
    Aug 29, 2010
    Messages:
    92
    Location:
    Texas
    I have been using the Eagnas PN7062 on my Ektelon D machine for about 6 months. The Eagnas clamps are about 3/8" taller than the old model D clamps. My model D stringer is modified to use the Gamma 6 point mounting system and the new setup was adjusted to accommodate the taller Eagnas clamps which have worked very well for me. The Eagnas clamps do fit the Ektelon 9/16" glide bar.
     
    #3
  4. Nuke

    Nuke Hall of Fame

    Joined:
    Apr 13, 2005
    Messages:
    2,976
    Location:
    location, location, location
    Ha! I'm thinking of the gems from their website. (We don't measure for you. You are not our customer. Buy somewhere else.)
     
    #4
  5. JavierLW

    JavierLW Hall of Fame

    Joined:
    Apr 29, 2007
    Messages:
    3,917
    NO SOUP FOR YOU!!!!
     
    #5

Share This Page