Gamma Progression 200

Discussion in 'Stringing Techniques / Stringing Machines' started by Sailor Tennis, Oct 31, 2010.

  1. Sailor Tennis

    Sailor Tennis New User

    Joined:
    Nov 25, 2009
    Messages:
    21
    Looking to buy a stringer i found the gamma progression and wondered if the progression II and x-string floor stand will fit the Progression 200
     
  2. lionel_101

    lionel_101 Rookie

    Joined:
    Feb 6, 2008
    Messages:
    246
    I looked around and if the Progression II model base is the same as the Progression 200 base then it should fit ok. It looks like the floor stand mounting plate has various mounting hole for different bases. Below is a link to the various Gamma manuals

    http://www.gammasports.com/collateral.cfm?collateral_type=6

    Select the Gamma Floor Stand III pdf and have a look.

    Also look at Gamma Floor Stand I pdf file as it shows a stand for a Progression machine.

    You can also ask GammaTech who will surely know.

    Good luck
     
  3. Sailor Tennis

    Sailor Tennis New User

    Joined:
    Nov 25, 2009
    Messages:
    21
    Thanks alot im going to order them and hope it fits and if i doesn't I'll just have to improvise haha
     
  4. Sailor Tennis

    Sailor Tennis New User

    Joined:
    Nov 25, 2009
    Messages:
    21
    How do you get a hold of Gamma Tech?
     
  5. rich s

    rich s Hall of Fame

    Joined:
    Feb 18, 2004
    Messages:
    2,539
    Location:
    ATL
    You post a topic titled: "Question for Gamma Tech" if he doesn't respond to this thread in a day or two.
     
  6. Gamma Tech

    Gamma Tech Professional

    Joined:
    Oct 12, 2004
    Messages:
    808
    Location:
    Pittsburgh, PA
    sorry i had to actually go and look at the P 200 base and the other Progression bases. They are different. the only way that i could see to mount the 200 to one of our stands it to buy the MPFS1. MPXFS & MPFS1 stands are the same except the MPFS1 has an additional plate that bolts on to the top of the stand. It is necessary because the older machines didn't have bolt holes in the center. you'd have to drill new holes in the rectangular plate & use the holes where the mounting feet are. you could trim the plate down if you want to. this would be the least amount of improvising that i could think of.
    bret
     
  7. Sailor Tennis

    Sailor Tennis New User

    Joined:
    Nov 25, 2009
    Messages:
    21
    ok ill have to try it thanks
     

Share This Page