hybrids for 1 piece stringing racquet

Discussion in 'Strings' started by kv581, Oct 10, 2004.

  1. kv581

    kv581 Semi-Pro

    Joined:
    Aug 17, 2004
    Messages:
    638
    Is it possible to hybrid string for racquets that require 1 piece stringing (eg. Wilson nCode 95)? How do you do it?
     
    #1
  2. schaefferm46

    schaefferm46 Rookie

    Joined:
    Sep 25, 2004
    Messages:
    291
    i have strung a two piece in the ncode 95 just on the crosses start stringing from the top
     
    #2
  3. Deuce

    Deuce Banned

    Joined:
    Feb 13, 2004
    Messages:
    5,270
    Location:
    A not so parallel universe...
    Any racquet can be strung 2-piece, as long as there are 4 grommets large enough to accomodate knots (typically, one at the top, and three at the bottom of the head - although this can be reversed on some frames.

    If you don't have 4 tie-off grommets, you can always enlarge existing smaller grommets - but make sure you do this BEFORE you pass the string through that grommet.
     
    #3

Share This Page