Improper stringing of Classic Mid (i.e., one piece stringing

Discussion in 'Strings' started by OnyxZ28, Sep 28, 2004.

  1. OnyxZ28

    OnyxZ28 Hall of Fame

    Joined:
    Sep 14, 2004
    Messages:
    2,143
    A Classic Mid just bought off of **** has one-piece stringing (two tie offs) as opposed to two, which is what Head specifies, should I cut these strings out, or is the frame not in any significant danger?
     
    #1
  2. Jerry Seinfeld

    Jerry Seinfeld Professional

    Joined:
    Feb 18, 2004
    Messages:
    1,251
    If an around the world method was used or if the mains end at head you should be fine.
     
    #2
  3. OnyxZ28

    OnyxZ28 Hall of Fame

    Joined:
    Sep 14, 2004
    Messages:
    2,143
    There are two tie-offs, oth on the mains, does that mean I'm OK?
     
    #3
  4. JRW

    JRW Rookie

    Joined:
    Feb 19, 2004
    Messages:
    230
    I haven't checked with Head, but according to the USRSA the Head Classic Mid can be strung one-piece, throat to head.
     
    #4
  5. Gaines Hillix

    Gaines Hillix Hall of Fame

    Joined:
    Feb 11, 2004
    Messages:
    4,240
    JRW is correct. There is no 2 piece pattern shown for this racquet on the racquettech website. Unusual for a Head frame, but correct on this one.
     
    #5
  6. OnyxZ28

    OnyxZ28 Hall of Fame

    Joined:
    Sep 14, 2004
    Messages:
    2,143
    Cool, thanks for the info!
     
    #6
  7. OnyxZ28

    OnyxZ28 Hall of Fame

    Joined:
    Sep 14, 2004
    Messages:
    2,143
    ANother question -- a LM Prestige Mid came in today, also strung one piece, tied off at the same grommets as the Classic Mid -- now I know the LM Prestige needs two piece stringing, so same Q, should I cut them out, or leave them be?
     
    #7
  8. JRW

    JRW Rookie

    Joined:
    Feb 19, 2004
    Messages:
    230
    Stringing the crosses on a racquet impropery will stress the frame while it's being strung. After it is strung it is no longer under the same stress, so playing with the LM Prestige Mid will not further hurt the racquet. Whatever damage that may have been done to it has already occured. The only time that you would really need to cut the strings out is if the poor stringing has caused the racquet to become distorted. Just make sure to request 2-piece stringing the next time you have it strung.
     
    #8
  9. OnyxZ28

    OnyxZ28 Hall of Fame

    Joined:
    Sep 14, 2004
    Messages:
    2,143
    Thanks, JRW. I just kind of assumed that they knew what they were doing. You know what they say about assumptions... :oops:
     
    #9
  10. AndyC

    AndyC Semi-Pro

    Joined:
    Mar 31, 2004
    Messages:
    760
    To be fair (as Jerry has intimated) stringing one piece with an around the world method is fine. I routinely use an ATW variant for all the rackets I string if it's a non hybrid string job (which is just about everyone I do aside from my own where I use a hybrid gut/synth gut). I'm not aware that the stresses on a frame strung two piece (head to throat) is any less/more than an ATW pattern.

    Does Head (or indeed any other manufacturer) have any stand on using an ATW pattern for their racquets where they specify a two piece stringing pattern?
     
    #10
  11. JRW

    JRW Rookie

    Joined:
    Feb 19, 2004
    Messages:
    230
    AndyC- The last I heard all the major racquet companies OK'd ATW stringing on their racquets except for Yonex.
     
    #11

Share This Page