Klippermate: try on an old racket first?

Discussion in 'Strings' started by GeoffB, Sep 11, 2008.

  1. GeoffB

    GeoffB Rookie

    Joined:
    May 19, 2008
    Messages:
    284
    I have a new PDR and I popped a string today.

    My brother gave me his old klippermate, and I'm all ready to give it a try. I was going to practice on an ancient Prince Graphite Mid that my brother uses as his third backup racket (it has lived a good life, but it's pretty much dead at this point, and doesn't really care what happens to it now). But then I popped a string on my Babolat, and I do want a new string job.

    So... provided that I'm very careful, what do you think, can I start with the Babolat, or should I do this first on a racket I don't care very much about?

    (or, I might just ask my brother to come over and show me how, he said he was willing to do that - in which case I might as well string the PDR).
     
    #1
  2. tenisjugador

    tenisjugador Rookie

    Joined:
    May 17, 2008
    Messages:
    124
    Location:
    New Jersey
    Just make sure you mount the racket carefully. If you do, then you have no worries going right to the PDR. Quite frankly, mess-ups on your first string job, if any, will probably have to do with the strings, not the frame.
     
    #2
  3. Nuke

    Nuke Hall of Fame

    Joined:
    Apr 13, 2005
    Messages:
    2,974
    Location:
    location, location, location
    If you've got a spare racquet to practice on for your very first string job, I'd use that. If you're going to make a mistake, better to do it on a frame you don't care about.
     
    #3
  4. x5150

    x5150 Rookie

    Joined:
    Jul 30, 2007
    Messages:
    177
    Location:
    Southern California
    I have a klippermate, did my first string job on a pro staff original which used to be my fav racquet. I think the only way you could harm the racquet is if the racquet was on the floor and u dropped the stringer on the racquet :p
     
    #4
  5. GeoffB

    GeoffB Rookie

    Joined:
    May 19, 2008
    Messages:
    284
    what string?

    Thanks for the replies. I think that I'll do the mount carefully, take my time, and do the PDR first.

    By the way, any recommendations on strings? The store where I bought the PDR put in synthetic gut at 60lbs, and it has too much pop for me. Yeah, I wanted pop, that's why I bought the PDR, but it's already a powerful racket, so I figure a deader string would be good. I have access to some old Dunlop Comfort, could try that. Any other suggestions? Since I'm apparently more likely to damage the strings than the racket, maybe I'll just use the Dunlop Comfort, and just take it out if I don't like it.
     
    #5

Share This Page