Making Grip Smaller

Discussion in 'Other Equipment' started by Lleyton Hewitt, Sep 4, 2006.

  1. Lleyton Hewitt

    Lleyton Hewitt Professional

    Joined:
    Aug 21, 2005
    Messages:
    950
    How do i make a grip smaller? eg.....is it possible to use 2/3 overgrips intead of 1 replacement grip and an overgrip?

    I no about the heat shrink one
     
    #1
  2. Sixpointone

    Sixpointone Professional

    Joined:
    Feb 1, 2005
    Messages:
    959
    Hi Lleyton,

    My best suggestion is to remove the Replacement Grip, try the 2-3 Overgrips as you are thinknig about, and see if it works for you.

    Worst case scenario, if it does not work, is you can reinstall the Replacement Grip.

    BTW, using Overgrips as your base grip might cause a slight bit more vibration to be felt, which may or may not be an issue for you.

    Hope that helps,
    John
     
    #2
  3. need2paint

    need2paint Rookie

    Joined:
    Jan 26, 2005
    Messages:
    375
    I would try a thinner replacement grip and not use an overgrip. Try the Wilson Micro-Dry Feel.
     
    #3

Share This Page