Multi/ ALU hybrid

Discussion in 'Strings' started by edge, Mar 21, 2004.

  1. edge

    edge Banned

    Joined:
    Feb 20, 2004
    Messages:
    543
    If I hybrid NXT Max 16 and ALU in the Volkl 9V-engine, which string would you suggest I use for the mains? Thanks.
     
    #1
  2. Swan Song

    Swan Song Professional

    Joined:
    Feb 19, 2004
    Messages:
    1,156
    I would suggest Babolat Syntronic Brio. It has a soft/firm feel because of the hard outer shell. It works really with ALU on my POG MP strung at 54lbs.
     
    #2
  3. edge

    edge Banned

    Joined:
    Feb 20, 2004
    Messages:
    543
    Yeah but I got 15 packages of NXT MAX 16 to use, so do I string it in the mains or crosses with ALU?
     
    #3
  4. Gaines Hillix

    Gaines Hillix Hall of Fame

    Joined:
    Feb 11, 2004
    Messages:
    4,240
    edge, my experience with polys with softer strings is that it makes the string bed feel springy. The trampoline effect is pronounced. If you're going to do this, I'd suggest a crisp playing string like Laserfibre Laser Supreme instead of NXT Max.
     
    #4
  5. edge

    edge Banned

    Joined:
    Feb 20, 2004
    Messages:
    543
    Thanks, Gaines, but I'm not going to let the 15 packages of NXT Max sit on the shelf...so do I string the NXT or the ALU in the mains?
     
    #5
  6. Grimjack

    Grimjack Banned

    Joined:
    Feb 18, 2004
    Messages:
    2,439
    If you've got that many, I'd just recommend you try it both ways. If you have a preference for control setups over livelier ones, try it with the poly's in the mains first. You'll find it springier than a pure poly, but less so than a full NXT job. Maybe it'll do the trick.

    If you prefer lively, but want to tame it just a little, and tire of excessive string movement, try it the other way first, with the NXT as mains.

    *shrug* Won't know till you try, right? You've got the stock to experiment. Do it.
     
    #6
  7. edge

    edge Banned

    Joined:
    Feb 20, 2004
    Messages:
    543
    Grim, yeah, I've strung one with ALU mains. Problem is, tournament coming up for my son in 2 weeks and I want to give him 2 alike. Looks like I will string the other with NXT mains and see which one he likes. All ALU is too powerful, all NXT is not enuf power but good control, so a hybrid is logical. Previously used all ALU with ZONE 7.1 but his new Volkl 9V racquet is more powerful and livelier. Thanks.
     
    #7
  8. Grimjack

    Grimjack Banned

    Joined:
    Feb 18, 2004
    Messages:
    2,439
    :shock:

    I think most would find this line of thinking odd. In my experience, NXT (or other multi) is FAR more powerful than any poly. ALU may be more powerful than the average poly, but is still quite a bit deader than your average multi.

    If he finds an all-ALU job too powerful, I might suggest going with a less lively poly (Super Smash or TiMo or something) for the mains, and softening it with the NXT that you don't want to waste for the crosses.

    Whatever you opt for, though, best of luck with it. And best of luck to the kid in the upcoming thingy.
     
    #8
  9. edge

    edge Banned

    Joined:
    Feb 20, 2004
    Messages:
    543
    Athough ALU has a muted feel, it has alot more pop then the typical poly. ALU has more pop than NXT Tour, which is the most powerful synthetic that Wilson makes. Changing racquets always takes some time to get the new racquet complemented with the right strings, thanks.
     
    #9
  10. touchytennis

    touchytennis Rookie

    Joined:
    Mar 20, 2004
    Messages:
    126
    just wondering, if u string hybrid with poly and multi, and the multi breaks. do you restring the whole setup? or just the multi?
     
    #10

Share This Page