Need help with poly

Discussion in 'Strings' started by kchau, Jul 3, 2011.

  1. kchau

    kchau Semi-Pro

    Joined:
    May 31, 2006
    Messages:
    792
    so after experimenting around with strings, i strung one of my frames with kirschbaum super smash at 55 on a lockout, and absolutely love it. i get so much control and spin from it, that i didnt get before.

    What I Love:
    Mains: super smash spiky 1.20mm
    crosses: super smash 1.20mm
    55LB Lockout.

    now this hurts my arm a tiny bit on big serves, and its preventing me from serving as big as i want to.

    What i've been playing around with is bhbr 17 in the mains, and livewire in the crosses, i have these strung at 53 on a lockout.

    for some reason it just doesnt feel as good to me, and my shots arent getting enough spin, and a lot are going long. I feel that with the super smash im getting a good rip on the ball, but with the big hitter hybrid im just not getting that same amount of control and spin i feel.

    Now my questions is, Can i get the same amount of spin from BHBR17/Livewire or a full bed of BHBR 17 as my super smash, while saving my arm? Is it just a matter of tension? or is it the hybrid that is making it too soft?

    What are my options? I want the spin and control as close to the super smash set up as much as possible, without destroying my arm.

    this is on k61 95's 16x18
     
    Last edited: Jul 3, 2011
    #1
  2. BigT

    BigT Professional

    Joined:
    Nov 6, 2006
    Messages:
    1,220
    I would try a softer poly, full.
     
    #2
  3. kchau

    kchau Semi-Pro

    Joined:
    May 31, 2006
    Messages:
    792
    any specific recommendations?

    would doing a full bed of bhbr17 get me what im looking for?
     
    #3
  4. kchau

    kchau Semi-Pro

    Joined:
    May 31, 2006
    Messages:
    792
    still looking for tips. thanks
     
    #4
  5. BigT

    BigT Professional

    Joined:
    Nov 6, 2006
    Messages:
    1,220
    I have gone full with PolyStar strings, and now Pro's Pro polys, and have not had any arm issues. Key is to not overplay them.
     
    #5
  6. PBODY99

    PBODY99 Hall of Fame

    Joined:
    Aug 17, 2005
    Messages:
    3,221
    I want to ask for a clarification please. For me time in the frame,exclusive of hours used, matters. Is it hitting time or length of time in the frame before re-stringing you are warning about?
     
    #6
  7. BigT

    BigT Professional

    Joined:
    Nov 6, 2006
    Messages:
    1,220
    Both factors must be considered. Each racquet, player, etc. is different. Rule of thumb for me, and one I try to guide customers with is:
    2 weeks or 10 hours of hitting.
    Keeping those limitations, I have avoided any arm issues.
    In the past, when playtesting strings, I would go more than that to test the durability, but that is when pain crept up in my elbow and wrist. Now, if I feel the string is dead before 10 hours, then I cut it.
    That is another reason why I like thinner polys: I break them, usually in the 5-8 hour point, before I have any doubt if they are dead or not.
    With all my set-ups costing less than $5 a set, it still works out very well.
     
    #7

Share This Page