need more power from microgel prestige MP

Discussion in 'Strings' started by mixtery, Sep 11, 2008.

  1. mixtery

    mixtery New User

    Joined:
    Sep 3, 2007
    Messages:
    34
    I use the microgel prestige MP 18x20 currently with big ace mains at 57lbs and maxim touch crosses at 59. I love the control it gives on groundies and serves but I am lacking a bit of power. I really have to take a hard full cut at the ball to generate pace which I kind of like but not for every shot. I think I would like a little more power and ball grip/softness to the string. I just feel that I can't get that "feel" from poly on this racquet. I think my stringer would recommend technifibre, but is there something with more feel and power than that? Should I just drop tension a few lbs? Recommendations appreciated!
     
    #1
  2. Gugafan

    Gugafan Hall of Fame

    Joined:
    Jun 16, 2007
    Messages:
    3,949
    Location:
    Birmingham, England
    I have just purchased a MG Prestige MP and had a similar problem. Though I have only had a chance to hit with the factory strings.

    The string pattern is fairly dense and tight on an 18x20, so if your looking for more power I would recommend stringing a good poly (SPPP) at about 51-54 lbs. This should erradicate the 'board' like feeling you get when stringing with higher tensions. In addition, SPPP is considered one of the softer feeling polys out there at the moment.

    I replaced the Hydrosorb grip with a thicker wilson replacement and a tournagrip, which made the stick feel more 'whippy' due to the weight shift towards the handle. This alone allowed me to hit with abit more spin and bite on my groundstrokes.

    You may find my thread in the racquets section useful.

    http://tt.tennis-warehouse.com/showthread.php?t=220858
     
    #2
  3. jazar

    jazar Professional

    Joined:
    Nov 7, 2007
    Messages:
    1,168
    Location:
    London
    i strung up that hybrid in my i.prestige at 54 and it played really well
     
    #3
  4. Seacoast Stringer

    Seacoast Stringer Semi-Pro

    Joined:
    Jan 30, 2008
    Messages:
    410
    Before switching strings it might be worth trying a drop to 54/57 lbs for one string job to see if you get the pop needed. With a dense string pattern, have you tried a full multi or a poly/gut hybrid? Also, a little bit of lead at 12 might help.
     
    #4
  5. ATIRagePro

    ATIRagePro Guest

    I would say the first thing you should try doing is lowering the tension a few lbs. If that doesn't work try looking into different polys. I personally like Unique BH which gave me the extra "umph"
     
    #5
  6. wumanchu23

    wumanchu23 New User

    Joined:
    Aug 5, 2007
    Messages:
    59
    Location:
    Bellevue, WA
    I just want to say i have this racket, and have the same problem. I string it with cyberflash mains at 56 and random synthetics at 56. Definitely more power than a fully poly job at 57. The local tennis shop guy recommended the MG Prestige Pro, but I thought that one lacked a little control compared to this one.
     
    #6
  7. tnkGod4tns

    tnkGod4tns Rookie

    Joined:
    Feb 18, 2004
    Messages:
    270
    natural gut, if too expensive go with a good multi string and play around with the tension, start at mid tension and work your way down till u get the right amount of control and power.
     
    #7
  8. eric892

    eric892 Rookie

    Joined:
    Mar 2, 2008
    Messages:
    262
    Location:
    Columbus, OH
    I have it strung at 55lbs with x-cel premium and had no problem generating power with this racquet. Should try lowering down your tension.
     
    #8
  9. 2ndserveace

    2ndserveace Semi-Pro

    Joined:
    Aug 13, 2008
    Messages:
    721
    Just swing reaaally hard.
     
    #9

Share This Page