New stringer 1 piece or 2?

Discussion in 'Strings' started by iradical18, Jun 14, 2004.

  1. iradical18

    iradical18 Professional

    Joined:
    Mar 16, 2004
    Messages:
    1,095
    Location:
    Lorton, VA
    I just ordered my Klippermate stringing machine, and ill be stringing my I.radical on it, it has 8 grommet holes in the throat so am i supposed to do a 1 piece or 2 piece, and ive also heard that doing 2 piece is safer.
     
    #1
  2. Gaines Hillix

    Gaines Hillix Hall of Fame

    Joined:
    Feb 11, 2004
    Messages:
    4,240
    irad, for a beginner, doing a 2 piece job is probably easier to manage. There is less string to handle, no measuring for the shortside(just cut the set of string in half), no worry about having to string around the world if the mains end at the throat. The only real disadvantage is that there are more knots to tie(4 versus 2) and the first knot on the crosses should be a starting knot. Of course, you have to use two pieces if you're going to do a hybrid of different string types.
     
    #2
  3. Ken Sachar

    Ken Sachar Rookie

    Joined:
    Feb 25, 2004
    Messages:
    102
    iradical18

    Number of holes in throat just determines where string starts (4,8,12 = start at head). Regardless of where it starts, you can use 1 (atw if mains end at throat) or 2 piece string job.

    Good luck on first racquet!

    Ken
     
    #3
  4. PHSTennis

    PHSTennis Semi-Pro

    Joined:
    Apr 8, 2004
    Messages:
    461
    LOL I go 2 piece no matter what... its much easier... I started with 2 piece also..
     
    #4
  5. Steve Huff

    Steve Huff Legend

    Joined:
    Feb 11, 2004
    Messages:
    7,257
    The most difficult part of stringing an iRad with 2 pieces is that you're going to block some holes at the throat, and they're going to be pretty hard to get the last few crosses through. By stringing an around the world pattern, you can make it a lot easier. But, using 2 pieces is easier to work with since you don't have so much string to work with.
     
    #5

Share This Page