Pre Stretch Strings?

Discussion in 'Strings' started by routine125, Sep 27, 2004.

  1. routine125

    routine125 New User

    Joined:
    Sep 15, 2004
    Messages:
    94
    Hello,

    I have noticed many stringing posts recommending pre-stretching strings? What does this actually mean? I did a search on it and came up with nothing.

    Any help would be appreciated.

    Thanks
     
    #1
  2. Tennis Guy

    Tennis Guy Semi-Pro

    Joined:
    Aug 2, 2004
    Messages:
    414
    Stretching strings before you string them. There will be less tension loss during stringing.
     
    #2
  3. Craig Sheppard

    Craig Sheppard Hall of Fame

    Joined:
    Feb 19, 2004
    Messages:
    2,361
    Location:
    Raleigh, NC
    A pretty simple procedure for those who string their own racquets: Loop length of string through immovable object (door handle, table, etc), then stretch it taut and give it a good hard pull and hold it for a few seconds. Now you've go some prestretched your string.

    Craig
     
    #3
  4. Jerry Seinfeld

    Jerry Seinfeld Professional

    Joined:
    Feb 18, 2004
    Messages:
    1,251
    The purpose is as described in previous posts. A prestretch not only helps to reduce some of the initial tension loss, but it also removes coil memory reducing the string's nesting properties as well as reducing chances for kinking during installation.

    When prestretching string it is important that you find a method that can be replicated for each string job. Consistency is important. If you want to have a consistent string job each time your prestretch needs to have zero variance. For me I tie one end around a door knob and use my spare flying clamp to hold the other. I then hold the clamp/string behind my back and lean forward for 25 seconds. I then release tension and then pull again for another 15 seconds. I do not face the string in case it snaps or the knot on the door knob releases. This hasn't happened, but it is a safety precaution to protect my ugly mug.
     
    #4
  5. christo

    christo Hall of Fame

    Joined:
    Feb 20, 2004
    Messages:
    1,811
    LOL, Jerry you should be a comedian.
     
    #5
  6. leog

    leog Rookie

    Joined:
    May 30, 2004
    Messages:
    290
    local stringer told me that you don't need to pre-stretch most synthetics (ie, prince synguts, gamma tnts, etc)...what do you online stringers think?
     
    #6
  7. exigentsky

    exigentsky New User

    Joined:
    Jul 29, 2004
    Messages:
    99
    Should gut be pre stretched also?
     
    #7
  8. Steve Huff

    Steve Huff Legend

    Joined:
    Feb 11, 2004
    Messages:
    7,257
    VS nor BDE recommend it. I don't prestretch Bow Brand either, unless someone specifically asks for it. I don't when stringing my own rackets either. I don't know what Klip or other gut man. advise.
     
    #8

Share This Page