Precautions to take before stringing?

Discussion in 'Stringing Techniques / Stringing Machines' started by redfist1000, Sep 12, 2010.

  1. redfist1000

    redfist1000 New User

    Joined:
    Nov 13, 2009
    Messages:
    45
    What are the different ways to check for damage on a frame (tapping for sounds ,etc?) besides the obvious spotting for cracks. Also is there anyway to check for internal damage? Thanks!
     
    #1
  2. redfist1000

    redfist1000 New User

    Joined:
    Nov 13, 2009
    Messages:
    45
    Also if anybody has tips in order for a better quality stringjob, feel free to list them. Thanks!
     
    #2
  3. esgee48

    esgee48 Hall of Fame

    Joined:
    May 30, 2010
    Messages:
    2,191
    Location:
    SF, CA
    Sight check the frame looking for damage. Really look over areas of scraped paint or ground rash looking for cracks or dents. Deep dents are signs of trouble with the underlying material. Sight check the grommet strip looking for areas where the string may rub against the frame. If a broken grommet can be tubed, do so; if not then if's up to you whether to continue. Tell the customer before doing anything. Warn them what may go wrong and if they say OK, then string it up.

    I've been especially careful when someone gives me a Prince with O ports. Sometimes the throat area has sharp turns and that causes poly or really thin strings to break on shanks.
     
    #3
  4. Ash_Smith

    Ash_Smith Hall of Fame

    Joined:
    Jan 18, 2005
    Messages:
    3,852
    Location:
    A green and pleasant land
    Precautions to take before stringing?

    I like to make sure I've got a big enough cup of tea to last the job :)

    other than that - what esgee said pretty much covers it, after a while you'll know exactly what you're looking for.

    Ash
     
    #4
  5. SirGounder

    SirGounder Hall of Fame

    Joined:
    Sep 16, 2009
    Messages:
    1,757
    Esgee has summed it up pretty nicely.

    If I have time, I like to pull out my string in advance and leave it somewhat stretched out. It helps me avoid tangles and kinks while stringing. This is really helpful with string from a package as opposed to a reel.

    I also double check my mounting but that's just me being paranoid.

    I check all my clamps and string gripper to make sure they are clean.

    I look for any grommets that may be problems.
     
    #5

Share This Page