Prince EXO3 Tour 16x18

Discussion in 'Racquets' started by banxy93, Aug 2, 2011.

  1. banxy93

    banxy93 New User

    Joined:
    Dec 28, 2008
    Messages:
    21
    Location:
    Palm Desert, CA
    Hey Guys,

    I now have a deal with prince and just recieved my new EXO3 Tours.
    Now my dilema is this i used to use the head microgel radicals with msv hex (1.23) in the mains and msv soft touch (1.3) in the crosses.
    Would that still be a suitable combination with the tours or would the soft touch break to quickly due to the open string pattern.
    Oh and what tension should i start off with?

    Thanks
    Banxy
     
    #1
  2. rlau

    rlau Professional

    Joined:
    Jul 8, 2008
    Messages:
    1,235
    Location:
    NL
    Because of the low stiffness of the frame full poly works well in the EXO3 Tour. I'd try that first.
     
    #2
  3. Faithfulfather

    Faithfulfather Rookie

    Joined:
    Jun 5, 2011
    Messages:
    373
    Location:
    Louisiana
    A good reference point is to string at mid tension and see how it plays then adjust from there. I have 2 of the same racquets and both are strung at mid tension. One with poly in the mains and one with a full bed of multis. I am still in the experimental stage. To be honest I bought a Klippermate and I can't stop restringing my racquets. One of the most expensive moves I've made so far.
     
    #3
  4. banxy93

    banxy93 New User

    Joined:
    Dec 28, 2008
    Messages:
    21
    Location:
    Palm Desert, CA
    I have decided to go a full bed of msv hex 1.23 at 50 pound
     
    #4

Share This Page