Proper Starting Clamp Method?

Discussion in 'Stringing Techniques / Stringing Machines' started by 4sound, May 7, 2012.

  1. 4sound

    4sound Semi-Pro

    Joined:
    Oct 5, 2009
    Messages:
    530
    Location:
    Match Point
    I use the Yasuki method but have seen other methods and want to ask the pro's and con's of this other one.

    Yasuki method makes sense as seen in Irvin's vid seen here:
    http://www.youtube.com/watch?v=VKjsIDdXEhU&feature=relmfu

    Drakulie does it different seen here:
    http://www.youtube.com/watch?v=H4TpCdIJHeM
    -He sets the clamp on the 2nd main string on one side, then pulls tension on the string which pulls it against the grommet. I was taught to always pull tension first then use the starting clamp onto a tensioned string.

    Thoughts?
     
    #1
  2. SwankPeRFection

    SwankPeRFection Hall of Fame

    Joined:
    Apr 30, 2012
    Messages:
    1,509
    Drak has fixed clamps on that machine. I don't understand why he uses a starting clamp for all that. Pull your two starting mains. Then set one fixed clamp at the opposite side of the strings you just pulled, release tension, then grab just one side of the string you just pulled (the one without the clamp on it) and repull tension. Clamp that one off. Release tension and pull one more main on that side and reclamp. Then go back to the other starting main you had clamped off and pull tension on it again. Release the fixed clamp on it and move it to the other side of the string where so you can clamp the newly pulled tension. Continue from here as normal.

    Maybe it's just me, but I find a starting clamp more useful to hold onto strings as you tie knots. lol
     
    #2
  3. uk_skippy

    uk_skippy Hall of Fame

    Joined:
    Feb 22, 2004
    Messages:
    2,058
    Location:
    Waterlooville, Hampshire, UK
    I start the same way as Drak does, as to me it's the easiest and quickest way to start the mains.

    Starting this way just replicates what you do when you string the other mains i.e. the (fixed/floating clamp) will be against the frame, you'll pull tension on the next string around the bend of the grommet.

    While the starting clamp is close to the frame, I place a piece of scrap leather inbetween the clamp and the frame. The grommets don't get pulled thru when tensioning the string.

    There is also a Babolat video where the presenter starts the rqt in the same way, and if they're happy to do it that way then I'm happy to follow.

    But, there are numerous way to start a rqt, and as long as the tension is applied so that the tension is applied correctly and consistently then thats fine.

    Regard

    Paul
     
    #3
  4. GlenK

    GlenK Professional

    Joined:
    Mar 20, 2011
    Messages:
    813
    Location:
    St. Augustine, FL
    I use the Yusuki method like Irvin does. But my mch is a bit different and I pull tension under the throat instead of over it.
     
    #4
  5. Irvin

    Irvin G.O.A.T.

    Joined:
    Mar 15, 2007
    Messages:
    12,282
    Location:
    Marietta, Ga
    You have to ask yourself why use any method for starting mains. If no starting clamp in used the fixed clamp must be tighter to hold the string from cllipping even slightly. If it does slip you damage the string. When using a starting clamp you first pull tension on two string then clamp the string so there is no change of slipping. When tension is releases there is less than half tension on the string and no very much chance of slippage. When you tension the first main there is back pressure on the fixed clamp and again not much chance of slipping. The starting clamp also keeps the fixed clamp up level with the string bed do the tension head does not have to pull it up and the string is straight in the clamp. Whether you put the starting clamp inside or outside the frame will make very little difference.
     
    #5
  6. bbulla

    bbulla Rookie

    Joined:
    Jan 6, 2012
    Messages:
    169
    Location:
    Oshawa, Ontario
    While I don't use either of these methods for starting the mains, I prefer Irvin's.

    In the Drakulie's he is using the starting clamp on the inside of the frame. I don't like to do that as it may damage a grommet. Also he is not setting tension 'inside' the starting clamp before he clamps the string.

    Irvin pulls tension, and then uses the starting clamp. I think that way is better.

    I prefer YULitle method as shown here: http://www.youtube.com/watch?v=Ygwsrrrj04Q
     
    #6
  7. drakulie

    drakulie Talk Tennis Guru

    Joined:
    May 3, 2004
    Messages:
    24,466
    Location:
    FT. Lauderdale, Florida
    ^^I've never damaged a frame using the method in the video. Also, as for setting the tension inside the starting clamp, why would I need to do this, when I am going to pull that string anyway when I release the starter? Too much overkill.

    On another note, I don't like using the center clamps as starters because over time they will begin to grow weak and have more drawback. Additionally, the center clamps have to be tightened enough to hold the first pull, which could end up crushing the string, or if the string slips, damaging it that way. Much safer to use a starting clamp.
     
    Last edited: May 8, 2012
    #7
  8. mad dog1

    mad dog1 Hall of Fame

    Joined:
    Jan 25, 2010
    Messages:
    4,993
    i've tried both the yusuki method and the method in drakulie's video. they both work well, but i've settled on the method in drak's video because it's a bit faster for me.
     
    #8
  9. 4sound

    4sound Semi-Pro

    Joined:
    Oct 5, 2009
    Messages:
    530
    Location:
    Match Point
    I'm starting to use Drak method but I don't like pulling directly against the grommet. I found a small hard rubber plumbing grommet I cut a slit into it to use around the string. It provides the clearance around the string grommet.

    For some reason I never really liked pulling both strings in the Yasuki method.
     
    #9

Share This Page