Questions on 6-PT SC Suspension Mounting System

Discussion in 'Stringing Techniques / Stringing Machines' started by fastdunn, Nov 24, 2006.

  1. fastdunn

    fastdunn Legend

    Joined:
    Feb 19, 2004
    Messages:
    6,294
    I'm trying to see if the mounting system might be usable for my old
    (non-Gamma) electronic machine.

    What is the dimension of the mounting system ? (length, width, height)
    How does it gets fixed on the base ?

    Thanks,
    FD
     
    #1
  2. fastdunn

    fastdunn Legend

    Joined:
    Feb 19, 2004
    Messages:
    6,294
    I should have put "Gamma" somewhere in the title...
     
    #2
  3. Gamma Tech

    Gamma Tech Professional

    Joined:
    Oct 12, 2004
    Messages:
    809
    Location:
    Pittsburgh, PA
    For SC turntable (both 2 & 6 Pt mounting):
    (all dimensions are actually in metric but this will be a quick check)
    • length of the turntable from knob to knob is ~23"
    • width (including the handles) is ~13"
    • height is ~1.5"
    • 4 bolt pattern is ~1-3/8" x ~1-3/8" in the center of the TT
    • the bottom of the TT is flat
    For 6 pt mounting:
    the height from the top of the TT to the bottom surface where the rqt sits on the shoulder support is 6-7/8". The height to the top of the shoulder support is 8-3/8". remember to add in the height of the turntable for the overall height.

    For 2 pt mounting:
    the height from the top of the TT to the bottom surface of the rqt. mounting is 7". add ~1" for hold down and the thickness of the rqt for the overall height of the mounting arm. remember to add in the height of the turntable for the overall height.

    bret
     
    #3

Share This Page