Quik fix for clamp slippage?

Discussion in 'Stringing Techniques / Stringing Machines' started by christian, Apr 20, 2004.

  1. christian

    christian Rookie

    Joined:
    Mar 6, 2004
    Messages:
    210
    Does it work to glue sandpaper to the inside of the clamps to hold the string better to prevent string tension loss? What was the grit if you tried it?
     
    #1
  2. Deuce

    Deuce Banned

    Joined:
    Feb 13, 2004
    Messages:
    5,270
    Location:
    A not so parallel universe...
    Fold a $1 bill (or, if you've got more money than brains, a $20 bill), and put it between the string and the clamp. This will solve the slipping problem.

    Others have said that business cards also work.

    I've never tried the business cards, but I know the dollar bills work.
     
    #2
  3. rich s

    rich s Hall of Fame

    Joined:
    Feb 18, 2004
    Messages:
    2,539
    Location:
    ATL
    Clean them with rubbing alcohol and a tooth brush.
     
    #3
  4. cantaloupe

    cantaloupe Rookie

    Joined:
    Feb 21, 2004
    Messages:
    194
    sandpaper try 400 grit, and yes it does work.

    An old school trick that was done on the old ektelons was to make vertical grooves in the clamp teeths. This is done by clamping piece of coarse sandpaper in the clamps, and pulling the sandpaper out from the clamps. This lef vertical grooves in the clamps and it does make a diference.
     
    #4
  5. Deuce

    Deuce Banned

    Joined:
    Feb 13, 2004
    Messages:
    5,270
    Location:
    A not so parallel universe...
    I'd much rather have a dollar bill squeezing my strings than sandpaper.
     
    #5
  6. cantaloupe

    cantaloupe Rookie

    Joined:
    Feb 21, 2004
    Messages:
    194
    really? I think the sandpaper is ok as long as you use a fine grade like 400 above. It's basically like having diamond dusting in your clamps.

    What would a dollar bill do anyway?
     
    #6
  7. Deuce

    Deuce Banned

    Joined:
    Feb 13, 2004
    Messages:
    5,270
    Location:
    A not so parallel universe...
    There's just something about the cottonny blend that grips really well. A friend of mine came up with the idea, and it worked great. We used it in the clamps, as well as the string gripper, which was also slipping.

    Since you're in Canada, you can use Canadian Tire money. Honest - it's the same material. Give it a try.
     
    #7
  8. passerofgasses

    passerofgasses New User

    Joined:
    Apr 16, 2004
    Messages:
    62
    OMG. Crappy Tire money can be useful?!? Well, I mean other than a last ditch substitute for TP.
     
    #8
  9. cantaloupe

    cantaloupe Rookie

    Joined:
    Feb 21, 2004
    Messages:
    194
    har har har......

    at least we get money back when we buy stuff? What do u get?
     
    #9
  10. passerofgasses

    passerofgasses New User

    Joined:
    Apr 16, 2004
    Messages:
    62
    Crap.

    I guess we save money with it too. It's just that I can't take my eyeballs off the poor quality stuff that ends up in my house to notice enough. To parallel with the TWboard, I guess I see them as the Eagnas of the hardware store industry. They have a place, but you don't wanna live there.
     
    #10

Share This Page