Stringing Instructions -- 2012 Wilson Pro Staff 6.1 95 BLX

Discussion in 'Stringing Techniques / Stringing Machines' started by myservenow, Mar 3, 2012.

  1. myservenow

    myservenow Semi-Pro

    Joined:
    Sep 27, 2007
    Messages:
    429
    Anyone have stringing instructions for the 16 x 19 version?
     
    #1
  2. myservenow

    myservenow Semi-Pro

    Joined:
    Sep 27, 2007
    Messages:
    429
    Never mind. I just found it on Wilson's website. It wasn't in the stringing instructions page as far as I could tell, but the instructions were included once you look at the racquet specs themselves.
     
    #2
  3. fms

    fms Rookie

    Joined:
    Aug 21, 2010
    Messages:
    251
    These are the instructions found at Wilson.com (and on the official PDF). I assume they're correct?

    Pro Staff Ninety Five BLX
    String Tension : 50-60 lbs
    String Length : 38’ (ss: 10’) or (20’ M’s and 18’ X’s)
    String Pattern : 16 x 19
    Start Main : at Throat. Mains skip 7H, 9H, 7T and 9T. Tie off M’s at 8T.
    One Piece : Start X’s at bottom at 7T. Tie off X’s at 5H.
    Two Piece : Start X’s at top at 7H. Tie off X’s at 5H & 11T.
     
    #3
  4. zapvor

    zapvor Legend

    Joined:
    Jul 27, 2006
    Messages:
    9,186
    Location:
    tennis courts
    yea that looks right
     
    #4
  5. fms

    fms Rookie

    Joined:
    Aug 21, 2010
    Messages:
    251
    Thanks, I was just asking because it's exactly the same as the 6.1 Tour - except that one says Tie off M's at 6T.

    (And yes I don't know anything about stringing :))
     
    #5
  6. Irvin

    Irvin G.O.A.T.

    Joined:
    Mar 15, 2007
    Messages:
    12,296
    Location:
    Marietta, Ga
    Most wilson rackets are 16 main rackets and skip 7 & 9 top and bottom. The mains start and end at throat and the 6th mains come out of 6T and cover 7T on both sides. The 8th mains come out of 10T and if they tie at 6T they will also cover 7T on both sides. makes for an interesting set if stringing two piece when string two piece when you get to the end. Two holes blocking 7T is a problem if you are not careful and prepare.
     
    #6
  7. fms

    fms Rookie

    Joined:
    Aug 21, 2010
    Messages:
    251
    Thanks for the replies!
     
    #7

Share This Page