Stringing instructions for Volkl Power Bridge 10 MP?

Discussion in 'Strings' started by Huppe, Aug 19, 2009.

  1. Huppe

    Huppe New User

    Joined:
    Sep 3, 2004
    Messages:
    84
    Does anyone have the official instructions, including tie offs, for the Volkl Power Bridge 10 MP?

    I looked in the common places, plus the website, and found nothing.

    I also contacted Volkl/Klip but received no response (I'd email TW but I've emailed them another question three times, the swingweight of the Becker 11 MP, given they list two drastically different ones, but have received no response . . . yeah, I'm a little bitter).

    Any help is appreciated, and if you have a string setup/tension you like I'd be interested to hear that too.

    Thanks!
     
    #1
  2. oldtimer

    oldtimer New User

    Joined:
    Apr 6, 2008
    Messages:
    54
    PB 10 (295g)

    19' x 17'

    18x 20 string pattern

    Start Mains @ Head
    Skip 8T,10T & 8H,10H

    Tie Mains 7T

    Tie Crosses 6H,9T

    Hope this helps.
     
    #2
  3. Huppe

    Huppe New User

    Joined:
    Sep 3, 2004
    Messages:
    84
    Thanks!

    Thanks for the help! I strung it up last night (I have the 325, but the head size and beam is the same, so I assume the instructions are too, and visually it seems right based on the grommets).

    Thanks again!
     
    #3

Share This Page