The Racquet Rattles. Help!

Discussion in 'Racquets' started by martymule, Apr 12, 2006.

  1. martymule

    martymule Guest

    I bought 2 new frames yesterday (tour diablo mids) and strung them last night. I took them to the courts today and while hitting with the one I noticed a slight rattle (coming from the top of the frame, I think). The rattle obviously does not hinder the way the racquet plays, but it really annoys me. The other one hits great. I'm not sure if anyone has experienced this and found a way to fix it. Does anyone has any suggestions for me or even any ideas on what I can check? Should I restring it? Take it back? Thanks for your responses.
     
    #1
  2. Saschanator

    Saschanator New User

    Joined:
    Feb 2, 2005
    Messages:
    17
    It happened to one of my racquet and it was a tour diablo as well. I think what my brother did for me was he opened the buttcap and tapped it on the ground (until the debris came out of the handle). I hope this helps :D
     
    #2
  3. vkartikv

    vkartikv Hall of Fame

    Joined:
    May 4, 2005
    Messages:
    3,282
    Location:
    The Gym
    It's called drill flash. Its just loose material in the frame that can be removed by removing the buttcap and giving the racquet a thorough shake.
     
    #3
  4. martymule

    martymule Guest

    Thanks for the responses.

    Not to be a total simpleton, but what's the easiest way to remove the buttcap? I have no mechanical inclination and I'll end up breaking it if I try to figure it out myself!
     
    #4
  5. armand

    armand Banned

    Joined:
    Jul 12, 2005
    Messages:
    3,747
    Location:
    RDS001 90: SPPP 1.18 @ 63/61
    What can you do when there is no trap door? Can you take out the debris if you take out the grommets?
     
    #5
  6. Aeropro joe

    Aeropro joe Semi-Pro

    Joined:
    Jul 2, 2005
    Messages:
    420
    on my prestige i took out the grommet at the throat since they were not flared out and i got the drill flash out, and this is easier than removing overgrip/ replacement grip and buttcap.
     
    #6
  7. TurbeauxTiger

    TurbeauxTiger New User

    Joined:
    Feb 12, 2006
    Messages:
    21
    get a knife and pop it open.
     
    #7
  8. vkartikv

    vkartikv Hall of Fame

    Joined:
    May 4, 2005
    Messages:
    3,282
    Location:
    The Gym
    Adely, I have never tried it but I am told that on the next grommet change, you can get it out through those holes.
     
    #8
  9. DX_Psycho

    DX_Psycho Semi-Pro

    Joined:
    Feb 1, 2005
    Messages:
    682
    yup i got my loose bits through the grommet hole of the prestige classic.
     
    #9
  10. Flexxed

    Flexxed Rookie

    Joined:
    Aug 2, 2005
    Messages:
    131
    I have the same problem with one of my Prostaff 6.1's but its filled with foam. Has anbody got rid of the rattle with a racquet like mine?
     
    #10
  11. LONGWHITECROSS

    LONGWHITECROSS New User

    Joined:
    Apr 11, 2006
    Messages:
    24
    get a fork and use one of the prongs and place it in the little hole then pop it open if it applies 2 thetype of racquet you guys on about
     
    #11

Share This Page