Vibration Dampener: Rubber Band?

Discussion in 'Other Equipment' started by kickserve, Apr 11, 2004.

  1. kickserve

    kickserve Guest

    I posted this in the tips section as well, but I thought I'd try here since this seems like the appropriate forum for ths question.

    I've seen Roddick use it, and people around me use it but I've never really tried or paid to much attention to it. (Using a rubber band as a vibration dampener, shock absorber/dampener, etc.)

    Currently I use a Head vibration dampener, and I was thinking about how much more cost effect it would be to use a rubber band. What are the differences in an actual brand dampener and a rubber band, and the pros and con? Also, what kind of rubber band, like thickness and length should be used. Oh, and how should you tie it for it to be used effectively?

    Thanks for any help.

    (Note: I did go here.. http://www.tenniswizard.com/dynamic...kies&AUTHOR=Andre Agassi and Andy Roddick, but the pictures were too small for me to tell what was going on, and I still didn't get the jist of it.[/url]
     
    #1
  2. polo02

    polo02 New User

    Joined:
    Apr 2, 2004
    Messages:
    13
    whoa, that is interesting, I always wanted to know how and why it was done, sorry I have no aswers for you, hopefully someone does though
     
    #2
  3. polo02

    polo02 New User

    Joined:
    Apr 2, 2004
    Messages:
    13
    kickserve, from the website you posted it looks that all they do is take a rubber band place it on top of the 2 central vertical strings (below the first horizontal string). Then, they take both ends of the rubber band and take it to the other side of the racket, next they take both ends of the rubber band and return them to the other side, the side you where you started ( however this time taking the right end of the band and going beside the left vertical string, the the left end of the rubber band going beside the right vertical string), once you have the ends back to the side where you started tie a knot, either once like Agassi or twice like Roddick. Hope this helps
     
    #3
  4. Nas Eclipse

    Nas Eclipse Rookie

    Joined:
    Apr 14, 2004
    Messages:
    114
    just tie the rubber band around the 2 main vertical string and tie the rubber band like you were tying a shoe.

    works for me
    never falls off
     
    #4
  5. PHSTennis

    PHSTennis Semi-Pro

    Joined:
    Apr 8, 2004
    Messages:
    461
    that cross knot... it unties.. I like to wrap the 1st horizontal between the 2 middle vertical... does it matter how its tied, or is the point getting it to stay... When I wanted it off... on the courts, no scissors, used a pencil, it broke, last resort: good ole teeth :)
     
    #5
  6. miguelcoletta

    miguelcoletta New User

    Joined:
    Feb 20, 2004
    Messages:
    53
    WHAT RACQUET IS THAT ON THE WEBSITE? it looks like a yellow old pure drive
     
    #6
  7. cheezecake

    cheezecake New User

    Joined:
    Apr 13, 2004
    Messages:
    95
    I tried that knot on that website and it feels nice! :D
     
    #7
  8. vadan25

    vadan25 Guest

    miguelcoletta, you were asking about the raquet on the website... if you notice the color of the rubber band the the guy's hands tying the knot, they are BLUE. The people who did the site probably messed with the colors to make the knot and hands stand out a little more. It does make the racquet a pretty cool shade of yellow!
     
    #8
  9. bsandy

    bsandy Hall of Fame

    Joined:
    Mar 25, 2004
    Messages:
    1,991
    If you tie it above the bottom cross, you won't be legal.

    Go to the Pros' Racquets and Gear section in a thread called what kind of paintjob is that???!! and look at Andre's rubber band.

    . . . Bud
     
    #9

Share This Page