Wilson Grip

Discussion in 'Racquets' started by Patricklovestennis, Dec 5, 2006.

  1. Patricklovestennis

    Patricklovestennis Rookie

    Joined:
    Jun 18, 2006
    Messages:
    111
    So this x-mas I am going to order the nBlade, and i demoed the 4 3/8 and it came with a tourna grip on it, so the grip size is decieving, I was wondering what other racquet brand grip size is wilson similar too, or should i just go with the 4 3/8, try it then, if needed add the overgrip??? Since its easier to make a grip bigger than smaller? right?
     
    #1
  2. aznspongehead

    aznspongehead Rookie

    Joined:
    Oct 2, 2006
    Messages:
    310
    Location:
    Southern CA
    What's your question? Yes it's easier to increase grip size than it is to decrease it. Overgrips increase the grip size by about 1/16 of an inch, so the 3/8 you had was probably around 4 5/16..
     
    #2
  3. Patricklovestennis

    Patricklovestennis Rookie

    Joined:
    Jun 18, 2006
    Messages:
    111
    so should i just buy the 3/8 and put an overgrip on? or just get the 4 1/2?
     
    #3
  4. WhiteSox05CA

    WhiteSox05CA Hall of Fame

    Joined:
    Sep 23, 2006
    Messages:
    2,013
    Did you like the 4 3/8?
    ________
    Diamanda
     
    Last edited: Sep 18, 2011
    #4
  5. snoflewis

    snoflewis Hall of Fame

    Joined:
    Aug 3, 2006
    Messages:
    2,838
    the gripsize is the same as all other brand's 4 3/8 (except babolat). the shape might be different, but they all measure 4 3/8 inches around. if you liked the overgrip on the 3/8 i would just go w/ the 3/8 and put an overgrip on it...nothing too difficult
     
    #5
  6. Patricklovestennis

    Patricklovestennis Rookie

    Joined:
    Jun 18, 2006
    Messages:
    111
    ok, but can i ask TW what kind of overgrip it is? it is blue, and has red tape, maybe turna grip?
     
    #6

Share This Page