Winn Pro 2 1000 Stringing machine

Discussion in 'Stringing Techniques / Stringing Machines' started by Andyroo10567, Nov 19, 2012.

  1. Andyroo10567

    Andyroo10567 Professional

    Joined:
    Nov 24, 2011
    Messages:
    1,140
    Location:
    Home
    Errrr. I popped off straight through the rivet and used my drill, and all that happened was that the rivet hole got bigger.
     
    #51
  2. Spinaway

    Spinaway New User

    Joined:
    Jun 22, 2010
    Messages:
    17
    Location:
    New Zealand
    OK Andy, it looks like its time to get out your big bushmans axe, and smack that little plastic thingy off the end of the side support arm .... haha :)

    Hmmm better not !! ok just use a drill slightly smaller than the outside diameter of the head of the rivet then. Drill size is not crucial. Go down gentle with the drill and the rivet head will pop off ... follow your nose after that.
    Good Luck.
     
    #52
  3. Andyroo10567

    Andyroo10567 Professional

    Joined:
    Nov 24, 2011
    Messages:
    1,140
    Location:
    Home
    Ok this is still not working. Do i go from the top of the side support and drill down? or from the bottom and drill up?
     
    #53

Share This Page