Talk Tennis

Talk Tennis (http://tt.tennis-warehouse.com/index.php)
-   Stringing Techniques / Stringing Machines (http://tt.tennis-warehouse.com/forumdisplay.php?f=23)
-   -   Mains only two ahead or all one-side? (http://tt.tennis-warehouse.com/showthread.php?t=422356)

Woolybugger 04-30-2012 12:11 PM

Mains only two ahead or all one-side?
 
Being a newbie at stringing, I watched videos and they said when starting mains, do not go more than 2-ahead on each side. So starting from the middle, I'd string 3 mains on the left then 3 mains on the right and so on. I am doing 2-piece.

Now when I bring up the AeroPro drive stringing instructions, it shows to string the entire left side first! Is this just for 1-piece or does this rule apply for 2-piece also? Confused....:confused:
http://www.babolat.com/media/tennis/...opro_Drive.pdf

Wikky 04-30-2012 12:35 PM

I don't see anything on the instructions you posted that points out stringing the entire left side first. The rule still applies when stringing one piece you should not string more than 2-3 mains on each side before stringing mains on another side.

coachrick 04-30-2012 12:39 PM

Quote:

Originally Posted by Woolybugger (Post 6498296)
Being a newbie at stringing, I watched videos and they said when starting mains, do not go more than 2-ahead on each side. So starting from the middle, I'd string 3 mains on the left then 3 mains on the right and so on. I am doing 2-piece.

Now when I bring up the AeroPro drive stringing instructions, it shows to string the entire left side first! Is this just for 1-piece or does this rule apply for 2-piece also? Confused....:confused:
http://www.babolat.com/media/tennis/...opro_Drive.pdf

That's a new one on me, neighbor! The only time I've seen that recommendation is on a 'one-clamp' machine. Even back in the '70s, we only started 4-5 mains off center and swept across the mains to the other side, came back and finished off the remaining mains...and THAT was with a single overhead clamp mated with a fixed 'starting clamp'.

I'd say most of my stringing over the years has been two mains on one side, four on the other, back to the original side with 4 more, etc...so only two ahead at any point. Early on, I often installed four mains on one side initially, in order to set the two power pads in place before switching to the other side, but, unless the world has changed drastically, I wouldn't use the indicated sequence from your guide.(I could be wrong IF there is some crazy new law of physics that slipped by me :) )

'bugger, what part of this big ole state are you in?

coachrick 04-30-2012 12:41 PM

Quote:

Originally Posted by Wikky (Post 6498360)
I don't see anything on the instructions you posted that points out stringing the entire left side first. The rule still applies when stringing one piece you should not string more than 2-3 mains on each side before stringing mains on another side.

The numbered sequence shows all of the mains on one side strung and tied off before starting the other side...unless they just have a strange way of numbering the stringing sequence. I agree with your alternating pattern or one very similar. Strange diagram, IMO.

Irvin 04-30-2012 01:01 PM

^^I will second that one you have to understand those diagrams first. It took me a long time to see it was both a one and two piece pattern being pictured.


All times are GMT -8. The time now is 02:57 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006 - Tennis Warehouse