Talk Tennis

Talk Tennis (
-   Stringing Techniques / Stringing Machines (
-   -   Eagnas Combo 710 loose clamp (

Andyroo10567 11-08-2012 10:29 AM

Eagnas Combo 710 loose clamp
( Not an experienced stringer ) Is there any way to fix a loose clamps on this?

Lakers4Life 11-08-2012 02:44 PM

There is a video of it on YouTube. But basically there is an access hole that you use a 3mm allen (hex) key. You'll need to line up the access hole in the Cone. It's easier to see if the disc cap is off. Like in the picture below.

The Allen key will turn an angled piston that pushes the cone to lock the clamp. Tightening the bolt and slot nut, may help, but it's a very coarse adjustment. The Allen key is a finer adjustment.

Andyroo10567 11-09-2012 08:16 AM

Thanks Lakers4Life! Will be working on it by Sunday i hope.

struggle 11-09-2012 10:14 AM

with clamp still mounted, turn it toward the middle of the table so the hole/plug faces 90 degrees toward the edge of table to access the fine adjustment screw.

Lakers4Life 11-09-2012 07:19 PM

Eventually you will want to replace the base clamps, because you will be constantly be adjusting your current base clamps. Pro's Pro came out with a Base Clamp similar to the Prince BCs, but they are sold out. The currently available BC is the V2, but it's more like the Gamma Quick Action BC (not the Switch Action Cam-Lock).

All times are GMT -8. The time now is 04:55 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
© 2006 - Tennis Warehouse