Talk Tennis

Talk Tennis (http://tt.tennis-warehouse.com/index.php)
-   Strings (http://tt.tennis-warehouse.com/forumdisplay.php?f=14)
-   -   tension help (http://tt.tennis-warehouse.com/showthread.php?t=445801)

Killbill 11-15-2012 08:04 AM

tension help
 
I typically string original prince syngut in my wilson blade 98 at 55lbs. I am about to try a hybrid with prince syngut in the crosses and babolat blast rpm in the mains. Can anyone suggest a good tension for these strings that I may like based on what I was stringing the syn gut at?

anubis 11-15-2012 08:39 AM

If you like 55 lbs with syn gut, then a full bed of poly around 45 lbs will feel very similar (similar control, power, stiffness). So I'd go 45 lbs mains and 47lbs crosses. You don't want to string syn gut too low.

fortun8son 11-15-2012 01:13 PM

I prefer to start at or below the min rec tension for the mains and 4# higher for the crosses.
So... 50/54 or 48/52 and adjust from there.

SJSA 11-15-2012 01:23 PM

IMO, poly should be lower at least 10%.

fortun8son 11-15-2012 01:34 PM

^^^ I would agree with that for fullbed poly vs. fullbed nylon, but I think that more than 4# differential in a hybrid is risking frame distortion.
Some would even say to split the difference and string both the same. 52/52


All times are GMT -8. The time now is 04:04 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
© 2006 - Tennis Warehouse