View Single Post
Old 08-08-2012, 08:04 PM   #5
Ennismt's Avatar
Join Date: Apr 2006
Posts: 195

I have two Wilson Six One Teams that were 1/4 apart. One was 1/8 inch short of 27 inches, the other 1/8 too long. I ended up sawing the long one down a 1/4 inch. Wasn't real pretty but it worked out to get them the same length. I was told that the 1/8 inch difference was within tolerance and not considered a defect.
Ennismt is offline   Reply With Quote