X-2 Gripper Problem

Doc Hollidae · 07-09-2008, 09:25 AM

I've had my X-2 Stringer for ~a year now and as I was preparing to string up my sticks, the gripper on my tensioner flew off. Can I simply reapply it with superglue or should I get it serviced? Kinda concerning though, because I don't want to damage my frame or tear string mid-stringing.

Zhou · 07-09-2008, 09:40 AM

Doc Hollidae · 07-09-2008, 09:44 AM

Quote:

Originally Posted by Zhou

Don't have pics since I'm at work. The sandpaper-like material that grips the string while tensioning, fell off the tensioner. That's the best description I can give.

SonRK · 07-09-2008, 09:45 AM

Well, I would get it serviced if I were you

Mansewerz · 07-09-2008, 09:45 AM

What do you mean flew off? Both of the gripper jaws? I think it's usually screwed on, but i'd wait for Gamma Tech to answer.

Zhou · 07-09-2008, 09:54 AM

Hmm based on your description I would contact Bret, the technician at Gamma about your problem.

Would you mind posting pics when you get home from work? Also why are you on at work?

Mansewerz · 07-09-2008, 10:03 AM

It sounds like the diamond dusting came off. I doubt it'll hurt your racquets. The string may slip though. Try this. I've heard it from YULitle before. Try putting a rubberband around one of the jaws so it holds better.

Doc Hollidae · 07-09-2008, 10:07 AM

Quote:

Originally Posted by Mansewerz

What do you mean flew off? Both of the gripper jaws? I think it's usually screwed on, but i'd wait for Gamma Tech to answer.

Just the top gripper. It looks like it was glued on, not screwed.

My gripper still looks like this.

The sandpaper-like material that lines the inside (where the string actually comes in contact with) fell off.

Mansewerz · 07-09-2008, 10:09 AM

Oh, it that case I believe you can try the YULitle trick I mentioned. It should hold the string because the rubber band isn't smooth and has some texture. The diamond coating just helps hold the string.

Zhou · 07-09-2008, 10:12 AM

Quote:

Originally Posted by Doc Hollidae

Just the top gripper. It looks like it was glued on, not screwed.

My gripper still looks like this.

The sandpaper-like material that lines the inside (where the string actually comes in contact with) fell off.

Hmmm. That is odd. I would contact Bret with Gamma. If it is in warranty, they should replace it for you.

Gamma Tech · 07-09-2008, 10:56 AM

the diamond coated plates are held on with a 2 part loctite. the gripper is made from re-enforced fiberglass and you could probably get something at a local hardware store.

also you can call me @ 800.333.0337 x226 or email me with the serial number, purchase date, store purchased, etc and we can talk about it further.

bret

Doc Hollidae · 07-09-2008, 11:07 AM

Quote:

Originally Posted by Gamma Tech

the diamond coated plates are held on with a 2 part loctite. the gripper is made from re-enforced fiberglass and you could probably get something at a local hardware store.

also you can call me @ 800.333.0337 x226 or email me with the serial number, purchase date, store purchased, etc and we can talk about it further.

bret

So I could just glue it back on with the Loctite glue?

Bud · 07-09-2008, 12:33 PM

Quote:

Originally Posted by Doc Hollidae

So I could just glue it back on with the Loctite glue?

Yepper. Seems you should disassemble the gripper first, though (hex head srews).

Gamma Tech · 07-09-2008, 12:51 PM

yes you can. remove it by removing the 4 hex bolts and keep track of the springs. the loctite that GAMMA uses is loctite 330 and loctite activator 7386. apply the activator to diamond insert and the 'glue' to the gripper and follow loctite's directions.

bret

Doc Hollidae · 07-09-2008, 01:10 PM

Quote:

Originally Posted by Gamma Tech

yes you can. remove it by removing the 4 hex bolts and keep track of the springs. the loctite that GAMMA uses is loctite 330 and loctite activator 7386. apply the activator to diamond insert and the 'glue' to the gripper and follow loctite's directions.

bret

I didn't see the two products you mentioned on the Loctite website. Are there commercial names for those two products or can you suggest alternatives?

Gamma Tech · 07-09-2008, 03:38 PM

you can find it on www.mcmaster.com it ain't cheap though. i've never used anything else but i'm sure that something else would work, probably a local hardware store could help.
bret

07-09-2008, 09:25 AM	#1
Doc Hollidae Hall Of Fame Join Date: Dec 2006 Posts: 1,658	X-2 Gripper Problem I've had my X-2 Stringer for ~a year now and as I was preparing to string up my sticks, the gripper on my tensioner flew off. Can I simply reapply it with superglue or should I get it serviced? Kinda concerning though, because I don't want to damage my frame or tear string mid-stringing. __________________ Pure Drive Roddick 2012 - Big Hitter Blue 17g - 54 mains/52 crosses

07-09-2008, 09:40 AM	#2
Zhou Hall Of Fame Join Date: Dec 2007 Location: Minnesota Posts: 2,233	__________________ 2x Head Youtek Prestige Mids - Solinco Tour Bite 17/Vanquish 16 @ 54 lbs.

07-09-2008, 09:45 AM	#5
Mansewerz Legend Join Date: Oct 2007 Location: Caught in No Man's Land Posts: 9,168	What do you mean flew off? Both of the gripper jaws? I think it's usually screwed on, but i'd wait for Gamma Tech to answer. __________________ Gameplan: Get it deep, wait for the short ball, then come in. (2) Volkl C10 Pros

07-09-2008, 09:54 AM	#6
Zhou Hall Of Fame Join Date: Dec 2007 Location: Minnesota Posts: 2,233	Hmm based on your description I would contact Bret, the technician at Gamma about your problem. Would you mind posting pics when you get home from work? Also why are you on at work? __________________ 2x Head Youtek Prestige Mids - Solinco Tour Bite 17/Vanquish 16 @ 54 lbs.

07-09-2008, 10:03 AM	#7
Mansewerz Legend Join Date: Oct 2007 Location: Caught in No Man's Land Posts: 9,168	It sounds like the diamond dusting came off. I doubt it'll hurt your racquets. The string may slip though. Try this. I've heard it from YULitle before. Try putting a rubberband around one of the jaws so it holds better. __________________ Gameplan: Get it deep, wait for the short ball, then come in. (2) Volkl C10 Pros